NEWS

Pound -- history of user-visible changes. 2026-09-22
See the end of file for copying conditions.

Pound is a continuation of the software originally developed by
Robert Segall at Apsis GmbH, which was officially discontinued
on 2022-09-19.  See the README file for details.

Please send pound bug reports to <gray@gnu.org>

Version 4.23.97 (git)

* Changes in configuration syntax.

** Sizes

Arguments to the following keywords can be suffixed with usual size
suffixes "k", "m", and "g" or their upper-case equivalents:

   ContentCapture
   LineBufferSize
   MaxURI
   WorkerStackSize

** Durations

The following keywords take a duration value as their arguments. A
duration is a sequence of numbers, each of which is followed by a
time unit suffix, "s", "m", "h" or "d", standing for seconds, minutes,
hours, or days, correspondingly:

   Alive
   Client
   ConnTO
   Grace
   OverrideTTL
   RetryInterval
   TTL (in the "Session" section)
   TimeOut
   WSTimeOut
   WatcherTTL
   WorkerIdleTimeout

** Synchronization lines

Synchronization lines in traditional formats are understood:

   #line N
   #line N "FILE"
   # N
   # N "FILE"

** Pragmatic comments

Comments that start with the word "pragma" are treated specially.
Such comments modify parsing of the configuration file.  This version
introduces two pragmatic comments:

   #pragma preprocessor COMMAND
      Enables configuration file preprocessing.  See below for
      details.

   #pragma tab-width N
      Instructs pound to consider each TAB character to be equal to N
      spaces. This is used when computing column offsets in
      configuration file, for diagnostic and reporting.

* Cert and ACME statements take into account include directory

Arguments to Cert or ACME are taken relative to the current include
directory.

* Wildcards are allowed in Cert statement

The argument to the Cert directive in ListenHTTPS can contain glob(7)
patterns, e.g.:

  Cert "ssl/*.pem"

* Placement of Cert directive within ListenHTTPS

In previous versions, the Cert directive was required to precede any
other SSL-specific statement (such as ClientCert, etc.) in the
ListenHTTPS section. This is no longer the case. The Cert directive
can be placed anywhere within ListenHTTPS, it will always be
processed first.

* The "Use" statement in Backend sections

The "Use" statement inherits settings from a named backend referred to
by its argument.  The "Priority" and "Disables" directives can be used
together with it, e.g.:

   Service
       Backend
	   Use "nb"
	   Priority 3
       End
   End

* HTTPS statement in Backend sections

In previous versions, the HTTPS statement was required to be used
prior to any of the following statements in a Backend section:
Cert, Ciphers, Disable. This requirement was lifted. Moreover, any
of these statements already imply that the backend is HTTPS capable,
which means that the HTTPS statement is superfluous if any of these
is used.

* Fall-through services

A new kind of services, fall-through services, is introduced.
Fall-through services are processed specially. If the request matches
such a service, any modification statements from that service are
applied to the request, and the selection process continues from the
next service. In other words, a fall-through service provides a way to
apply a set of modifications common for all services that follow.

A service is marked as a fall-through using the "FallThrough"
statement. Such services cannot contain backend definitions or
"Rewrite response" statements. An example of a fall-through service
follows:

  Service
      Path -beg "/status/"
      SetHeader "Host: internal"
      LogSuppress success
      FallThrough
  End

* Early rewrites

Any request modification directives are normally applied to the
incoming request immediately before sending it to the selected
backend. A new flavor of the "Rewrite" statement is introduced:

  Rewrite early

Such statements are applied to the request at the early stage of
its processing.  "Rewrite early" statements appearing in ListenHTTP
(or ListenHTTPS) section are applied first, right after the request
headers have been received and parsed. Such statements appearing in
Service sections are applied during service selection, before applying
service selection statements for that service.

This means that any modifications done in "Rewrite early" sections are
visible to conditional statements (both standalone and those
contained in "Rewrite" sections).

It is important to notice that any modifications done by early
rewrites in a Service section remain visible for subsequent sections,
if this one is not selected for processing the request.

To summarize, this release provides two mechanisms for making
request modifications visible to conditional statements: early
rewrites and fall-through sections.

* Beacons

Beacons are special boolean values that can be used in conditional
statements to select the service to use.  Beacons can change their
value only via the pound control interface, using poundctl or similar
tool.

Beacons provide a mechanism for adopting pound configuration to
the changing external conditions (such as the current load or request
rate) without the need to reconfigure the pound daemon.

Beacons are declared using the "DeclareBeacon" statement in the global
scope:

  DeclareBeacon "NAME" [BOOL]

Beacons are examined using the "Beacon" statement in "Section",
"Match", or "Rewrite" section, e.g.:

  Beacon "NAME"

To change or inspect the actual value of a beacon, use poundctl:

  poundctl beacon
    Examine all declared beacons and their values.

  poundctl beacon NAME
    Examine the value of beacon NAME.

  poundctl -s NAME
    Set beacon NAME to "true".

  poundctl -d NAME
    Set beacon NAME to "false".

* Request timings

The %T log conversion specifier takes an optional prefix,
specifying starting point for time measuring.  Its possible values are

  init
    The time between establishing connection or sending last
    byte of the previous response and sending last byte of the
    response to the client.
  req
    The time between receiving first byte of the request and
    sending last byte of the response to the client.  This is the
    default.
  reqend
    The time after receiving last byte of the request header and
    sending last byte of the response to the client.
  be
    The time between sending first byte to the backend and sending
    last byte of the response to the client.

E.g.: "%{reqend:us}T"

Similar extension applies to the "D" convertsion.  Here, the prefix
indicates the stage of request processing whose duration is requested.
Its values are:

  init
    Time between establishing the connection or sending last byte of
    the previous response and receiving first byte of the request.

  header
    Total time reading the request headers, i.e. between receiving
    first byte of the request and sending it over to the backend.

  select
    Time spent selecting the service and backend.

  resp
    Time processing the response, i.e. time elapsed between the moment
    when the service and backend have been selected and the moment after
    the last byte of the response has been sent to the client.

  be
    Time between sending first byte to the backend and sending last
    byte of the response to the client.

  totalreq
    Time between receiving first byte of the request and sending last
    byte of the response to the client.

  grandtotal
    Time between establishing the connection or sending last byte of
    the previous response and sending last byte of the response to the
    client.

* Tracing

Tracing helps in debugging complex service selection or rewrite
conditions. Each service has an associated trace flag. When this flag
is set, each evaluated conditional is reflected in the pound log.
Example output:

  (7f2d5534f640) Request from: 192.0.2.11
  (7f2d5534f640) Request: GET /media/id.jpg HTTP/1.1
  (7f2d5534f640) Headers:
  (7f2d5534f640) Host:example.com
  (7f2d5534f640) User-Agent: Mozilla/5.0
  (7f2d5534f640) Accept: */*
  (7f2d5534f640) service selection: pound.cfg:29.9-36.11:considering service
  (7f2d5534f640) service selection: pound.cfg:30.17-26: header: 1
  (7f2d5534f640) service selection: pound.cfg:31.17-25: path /media: 1
  (7f2d5534f640) service selection: implicit AND: 1
  (7f2d5534f640) service selection: pound.cfg:29.9-36.11: service selected

The value in parentheses identifies the worker thread that did the
selection.  Result of each conditional is printed as a boolean value
(0/1).

To manage trace flags, a new poundctl subcommand, trace, is provided:

  - poundctl trace /L/S
    Show trace flag for service S in listener L.

  - poundctl trace -s /L/S
    Set trace flag for service S in listener L.

  - poundctl trace -d /L/S
    Delete (unset) trace flag for service S in listener L.

The object path specification can be shortened to /L, to operate on all
services in the listener L, or to /, to operate on all services
defined in the configuration.

* Preprocessing

Configuration files can be optionally preprocessed using an external
program.  To do so, specify the command line of the preprocessor in
the "preprocessor" pragmatic comment appearing in the very beginning
of the principal configuration file, like that:

  # pragma preprocessor m4 -s

It is important that this comment appears before the first
configuration statement.  Comments and empty lines before it are
allowed.

A new command line option -E instructs pound to print the preprocessed
text and exit.

Version 4.23, 2026-05-26

* Important bugfix

A bug in "SendFile" allowed for reading files outside of the
configured directory.  This is fixed.

* Compilation

The early pthread_cancel probe hack is no longer used.  Consequently, the
"--disable-pthread-cancel-probe" configure option is gone.

* Handling of errors during service selection

In previous versions, if service selection failed due to an error
(e.g. because a non-existing backreference was used, a run-time error
in a Lua function occurred, or the like), that service would be skipped
as if its conditions returned false, and the next one would be tried.
This could lead to selecting an improper service in case of error.

Starting from this version, any error occurring during service
selection causes pound to return internal server error (500).

* File descriptor usage

At startup, pound closes all inherited file descriptors numerically
greater than 2.  If this is undesirable for some reason, use the
-Wno-close-extra-fds command line option.

Capacity of the incoming connection queue (used when all workers
become busy) is computed so as to prevent the program from running out
of file descriptors.  It can also be set explicitly, using the
"ConnectionQueueSize" configuration file statement.

* Configuration constants

The "Constant" statement defines a configuration constant for use in
string expansions and Lua code.  A constant is a string value
identified by a unique name.  The "Constant" statement can appear in
top-level, listener, and service scopes.  The syntax is:

  Constant "NAME" "VALUE"

or

  Constant "NAME" OPTIONS

where OPTIONS are:

  -file FILE
    Read constant value from the file FILE at startup.

  -filewatch FILE
    Read constant value from the file FILE, and monitor it during
    the runtime for changes.

  -trim
    Trim off the trailing whitespace from the obtained value.

Constants can be used in string expansions (using the "%[const NAME]"
accessor), and in Lua code (using the "http:const(NAME)" method).
Refer to the documentation, section "Constants", for a detailed
discussion with examples.

* Tunnels

A tunnel passes an opaque stream of bytes between the client and backend.
It is defined in configuration file using the following construct:

  Tunnel [ "ID" ]
      Address IPADDR
      Port PORT
      Backend
	  Address IPADDR
	  Port PORT
      End
  End

Naturally, only one backend is allowed.  Similarly to other listeners,
the Address/Port pair in the Tunnel section can be replaced with a
single SocketFrom statement.  The following statements are allowed in
Backend subsection: Timeout, ConnTO, Disabled.

* Runtime log level control

The "poundctl" command can be used to inspect log level settings or to
change them without restarting pound.

  - poundctl log [/]
    Show global log level.

  - poundctl log /L
    Show log level for the listener L.

  - poundctl log /[L] F
    Set log level F. If argument is "/", global log level is
    set. Otherwise, log level for the listener L is set.

  - poundctl log -d /L
    Clears log level setting for the listener L.  As a result, the
    listener will use global log level.

  - poundctl log -d [/]
    Set global log level to "null".

* Lua: access to the originator IP

Two new fields are available in the "http" table:

  * http.rmt_ip

    Request originator IP address (as string).

  * http.fwd_ip

    Request originator IP address (as string), determined using the
    X-Forwarded-For (or similar) header. If the request bears no such
    header or if the TrustedIP list is not declared, this is
    equivalent to http.rmt_ip.

Version 4.22, 2026-03-29

* Remove spurious log messages.

* Metric backend: close connection after response.

* Support IPv4 mapped to IPv6 in ACLs.

It is no longer necessary to use ::ffff:<IP4> notation in ACLs to
match mapped IPv4 addresses. Using <IP4> is enough.

* Support for split Header and Host conditions is rewritten

A split "Header" condition is

  Header "NAME" [OPTIONS] "PATTERN"

In previous versions, this construct was internally translated to a
"Header -re ..." statement, and that introduced several inconsistencies.
In particular, when using the "-re" option, "PATTERN" was treated as
anchored, i.e. as if it started with a "^".  Besides, -exact and -prefix
were treated as equivalent.  This is now fixed.  The new implementation
strictly follows the logic of the statement: it compares each header whose name is "NAME" with "PATTERN" in accordance with the given OPTIONS.

This applies also to "Host" condition, which is equivalent to

  Header "Host" [OPTIONS] "PATTERN"

* Bugfixes

** Fix durations on 32-bit architectures.
** Fix recognition of truncated request capture.


Version 4.21, 2026-03-14

* Changes in Lua API

** http.balancer

Balancer group of the currently selected backend.  Setting this field
to a numeric value instructs pound to re-send the request to a backend
from the balancer group with the weight greater than or equal to the
value supplied.

** http.resendcount

Keeps number of resending attempts underwent by the current request.

** http.service.name

Name of the currently selected service.  Assigning to this variable
instructs pound to send the current request to the named service.
Assigning a nil also implies to rerun service selection from the
beginning.

** http.service.locus

Location of the currently selected service in the configuration file.

* Setting ciphersuites for TLSv3

The syntax of the "Ciphers" statement (ListenHTTPs and Backend
sections) has been extended to allow for specifying ciphersuites for
TLSv3 protocol.  The new syntax is:

  Ciphers [typeopt] "cipherlist" ...

where optional typeopt option defines how to interpret the cipherlist
argument that follows it. Its possible values are:

  -cipherlist
	Sets the list of ciphers that affects only TLSv2 and prior protocols.
	This is the default.

  -ciphersuites
	Sets the list of TLSv3 ciphersuites.  It will be combined
	with any TLSv1.2 and below cipher lists that may have been configured.

Notice, that a single "Ciphers" statement can set both TLSv2 and TLSv3
ciphersuites:

   Ciphers "HIGH:@STRENGTH:!RSA" -ciphersuites "TLS_AES_256_GCM_SHA384"

* New configuration setting: WorkerStackSize

Sets worker thread stack size, in bytes.

* Lua compile-time check

The compile-time check for Lua no longer depends on pkg-config.

Version 4.20, 2026-02-06

* New selection statement: Method

This conditional statement evaluates to true, if the request method
matches the supplied pattern, e.g.:

  Service
      Method "POST"
      ...
  End

* New internal backend: Success

Always returns a 200 response code.  This is intended mainly for
handling special requests.  For example, the service definition
below replies to the OPTIONS requests:

   Service
      Method "OPTIONS"
      Rewrite response
	 SetHeader "Access-Control-Allow-Origin: example.com"
	 SetHeader "Access-Control-Allow-Methods: GET,POST,PUT"
	 SetHeader "Access-Control-Max-Age: 1800"
      End
      Success
   End

* Changes in Lua API

** http.req.body

This field contains the captured content of the incoming request.  For
it to be available, content capturing must be explicitly enabled for
the service on whose behalf the Lua code is called.  Content capturing
is enabled by the following new configuration statement:

   ContentCapture SIZE

where SIZE sets the upper limit on the captured content size.  If the
actual content length is greater than this value, saved material is
discarded and http.req.body is set to nil.

** http.resend

Lua functions invoked in "Rewrite response" can set this variable to
'true' to have pound resend the modified request to backend. To avoid
dead loops, pound limits the number of such resends to 4 per request.

Version 4.19, 2025-12-11

* Support for Lua

Functions written in Lua can be used to implement complex request
matching conditions, modify requests and/or responses, and implement
new backends.  You will need Lua version 5.3 or newer.  By default,
configure will enable Lua support if it finds the necessary headers
and libraries.  This can be controlled using --disable-lua and
--enable-lua options.

At runtime, Lua sources are loaded using Load statement in the Lua
global section of the configuration file:

   Lua
      Load "impl.lua"
   End

A function returning boolean value can be used as a conditional:

   LuaMatch "myfun" "arg"

Any number of arguments (all of string type) can be provided.
Arguments undergo usual expansions prior to being passed to the
function.

Two more similar statements are added:

   LuaModify   - Applies a Lua function to modify the request (or
		 response).  It can be used in ListenHTTP,
		 ListenHTTPS, Service, Match and Rewrite statements.

   LuaBackend  - Calls a Lua function that implements a backend.

* Detached conditions

Detached condition is a set of conditional statements not associated
with any service, which is assigned a unique symbolic name.  Detached
conditions are defined using the Condition statement in the global
scope of pound configuration file, e.g.:

  Condition "protected"
     Path -beg "/admin"
     ACL -file "internal.acl"
     BasicAuth "htpasswd"
  End

Detached conditions can be invoked using the "Eval" statement, which
is allowed anyplace where the normal conditional is allowed.  Result
of evaluation is cached and reused in subsequent Eval statements
referring to the same condition.  E.g.:

  Service
     Eval "protected"
     ...
  End

Detached conditions provide a convenient way to define conditional
statements with are used repeatedly in multiple Service statements.

* New request modification statement: DeleteQuery

Removes query part of the request URL.

* One-argument form of SetQueryParam

When used with one argument (name of a query parameter), SetQueryParam
causes removal of that query parameter.

* Percent encoding and decoding

The Path and QueryParam conditional statements accept new option
-decode.  When given this option, the value will undergo
percent-decoding prior to comparison.  E.g.:

   QueryParam "t" -decode "?"

Similarly, SetPath and SetQueryParam statements accept new option
-encode.  When given this option, the value will be percent-encoded
prior to setting it.

* Relative pathname in SendFile statement.

If the argument to SendFile statement is not an absolute file name, it
is resolved relative to pound include directory.

* Turning PID file off.

To disable PID file creation, use PIDFile "-".

Version 4.18, 2025-10-29

* Emacs mode for editing pound configuration files

Major mode for editing pound configuration files in GNU Emacs is
implemented in file src/pound-mode.el.  Its installation and usage is
covered by Chapter 11 of the Pound Manual, entitled "Emacs Major Mode".

* Include statement accepts globbing patterns

If the argument to "Include" configuration statement is a shell
globbing pattern, all regular files matching that pattern will be
included, in lexicographical order.

* New configuration statement: LineBufferSize

Sets the line buffer size.  Line buffer is used when reading request
line, backend response status line, and header fields in both requests
and responses.  Thus, this value limits the maximum length allowed for
these parts of HTTP messages.  By default, it is set to the internal
buffer size (4096), which is also its minimum allowed value.

This statement can be used in global scope and within ListenHTTP
(ListenHTTPS) sections.

* TBF statement

This conditional statement implements token bucket filter.  Its
arguments are: the ID of the bucket (a string, subject to
backreference expansion and request accessor interpretation), maximum
allowed rate (requests per second) and a burst size (number of
requests).  The statement evaluates to true if the token bucket accepts
the request and to false otherwise.

See Pound Manual, Section 4.6 "Rate-limiting", for a detailed
discussion.

* New request accessor: remoteip

%[remoteip 0]  expands to the real originator IP;
%[remoteip 1]  expands to the IP determined from the X-Forwarded-For
	       (or similar) header.

* Originator IP for ACL matching

By default, ACLs are applied to the IP address from which the request
was received.  It is now possible to use the IP obtained from X-Forwarded-For
header, instead.  To do so, use the -forwarded option keyword, e.g.:

   ACL -forwarded -file "acl.lst"

* Changes in log format specifications

** Expansion of %v changed

The %v specifier now expands to the host name used in the request, as
obtained from the "Host" header, with port specification removed.

If you want the old expansion (name of the listener that served the
request), use "%{listener}N".

** Support for new specifiers

 . %l            Reserved for future use.  Expands to single dash.
 . %p            Port number of the listener that served the request.

** Built-in formats changed accordingly:

3, "vhost_combined"
   "%v:%p %a %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\""
4, "combined"
   "%a %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\""
5, "detailed"
   "%v:%p %a %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"
   (%{service}N -> %{backend}N) %{f}T sec"

* poundctl core

This command shows core pound statistics: server time, daemon version,
pid, and uptime, as well as worker threads configuration and
statistics.

* Openmetrics output

Metrics describing listeners and services are labeled by the listener
and service names, as well as by their ordinal numbers in the
configuration.

* Testsuite: optionally use multi-process model

If Perl is built without ithreads, testsuite harness switches to
multi-process model.


Version 4.17, 2025-07-29

* Tagging conditional statements

All conditional statements that match against a pattern can be tagged
using the following option:

   -tag "T"

where T is an arbitrary string.  This tag can then be used to refer to
a subexpression obtained as a result of matching, for example:

   Path -tag "dir" -re "^/static(/.*)"
   Header -tag "type" "Content-Type:([^/]+)/([^;]+)"
   SetPath "/assets/$1(type).$2(type)$1(dir)"

* Changes to the "ACL" statements

Two new forms of the ACL statements are provided:

 - ACL -file "NAME"

   Reads ACL from the file NAME.  The file shall contain a list of
   CIDRs, one per input line.  CIDRs need not be quoted.  Empty lines
   and comments are allowed.

   The file is read once, at program startup.

 - ACL -filewatch "NAME"

   Same as above, but the file will be monitored for changes during
   the runtime.  If a change is detected, the file will be rescanned
   and the ACL updated.  To ensure file changes are noticed
   immediately, pound relies on filesystem monitoring API provided by
   the operating system - inotify on GNU/Linux systems and kqueue on
   BSD.  On systems not supporting either interface, the file will be
   checked periodically.  The interval between two successive checks is
   defined by the WatcherTTL global directive.

The corresponding new forms are implemented for all ACL statements,
i.e.:

 - Named ACLs:

   ACL "name" -file "filename"
   ACL "name" -filewatch "filename"

 - Trusted IP lists:

   TrustedIP -file "filename"
   TrustedIP -filewatch "filename"

* Use of "-filewatch" with request matching directives

In addition to ACL, the -filewatch flag discussed above can be used with
the following request matching directives: Header, Path, Query, QueryParam,
StringMatch, URL.

* Changes to the "BasicAuth" statement

The statement takes an option: -filewatch or -file.  The option
-filewatch is the default (see above).  The -file option can be used
to disable file change monitoring.

* Changes to the "Header" statement

New statement form is introduced:

    Header "FIELD" [OPTIONS] "VALUE"

In this form, pattern modification options apply to header value only,
e.g.

    Header "Content-Type" -beg "text/"

* New special backend "SendFile"

This backend treats the path part of the request as local file name
and sends back the contents of that file, if it exists.  Default
content type is "text/plain".  Both parameters can be changed using
request (for file name), and response (for content type) rewriting.

The syntax is:

	 SendFile DIR

where DIR specifies the directory from which to serve files.

* Error file contents

Error file supplied with "Error", "ErrorFile", or any "ErrNNN"
directvie, can begin with HTTP headers.  If so, these will be
sent along with the response, and the actual response contents will
begin after the empty line that terminates the headers.

* Error response rewriting

  When a regular backend responds with an error, the content (body)
of that response can be replaced with an arbitrary custom page.  For
this to work, the listener must define a custom page for the
status code in question using the ErrorFile statement, and error
response rewriting must be explicitly enabled.  The latter is done
with the following statement:

   RewriteErrors on

The statement can be used both in ListenHTTP (ListenHTTPS) and in
Service blocks, the latter overriding the former.

* Bugfixes

** Improper pattern handling in patterns read from file

When using -file with one of the following pattern types: -exact, -beg,
-end, -contain, only first pattern from the file was compiled using the
requested pattern type.  Remaining ones were treated as POSIX regular
expressions.


Version 4.16, 2025-01-13

* Fix backend probing when compiled without support for dynamic backends.

* Reject requests with oversized chunk bodies.

* Handle errors that occur during evaluation of conditionals.

Version 4.15, 2024-11-17

* New configuration statement: IgnoreSRVWeight

Instructs pound to ignore weight value of an SRV record when
generating new backend from it.  Priority of the generated backend is
copied from its matrix backend.

* New configuration statement: OverrideTTL

When used with dynamic backends, instructs pound to use the supplied
value as TTL, instead of the one returned in DNS response.

* Load balancing code revisited

Removed arbitrary limit on backend priority value.  The allowed range
is now 1..65535.

Remove priority mapping for SRV-generated backends.  SRV weights are
assigned to backend priorities verbatim.

* Fix access to freed memory in session handling code.

* Improve testsuite

Check for missing perl modules and skip tests if needed.

DNS-based tests are disabled by default, due to their experimental
nature.  Use --enable-dns-tests to enable them.

The poundharness.pl script runs a self-test when invoked with the
--fakedns option, to avoid spurious test failures.


Version 4.14, 2024-10-13

* Dynamic backends

Dynamic backends are created and updated on the fly based on the
information from DNS.  To declare backend as dynamic, use a
symbolic host name in its "Address" statement and add the "Resolve"
statement with one of the following values:

  first     Resolve the symbolic host name and use first IP from
	    the DNS response as the address of the created dynamic
	    backend.  Thus, at most one dynamic backend will be
	    created.

  all       Resolve the symbolic host name and create one backend for
	    each address from the DNS response.  This enables load
	    balancing between created backends.  Each backend will be
	    assigned the same priority.

  srv       Obtain SRV records for the host name and use them to
	    generate regular backends.  Each record produces new
	    dynamic backend of "Resolve all" type, which creates
	    regular backends as described above.  The weight field
	    of the SRV record is mapped to the priority field of each
	    generated backend.  The SRV priority field determines
	    the balancing group (see below) where the backend will
	    be hosted.

By default, both IPv4 and IPv6 addresses are looked for.  You can
select the specific address family using the "Family" statement.  Its
allowed values are:

  any       Use all address families available.  This is the default.

  inet      Use only IPv4 addresses.

  inet6     Use only IPv6 addresses.

For example:

  Backend
      Address "be0.example.net"
      Port 8080
      Resolve first
      Family inet
  End

Dynamic backends will be updated periodically, when the TTL of the
corresponding DNS records expires.  If the hostname cannot be resolved
or a DNS failure occurs, next update will be scheduled in 600
seconds after the failure.  This interval can be configured using the
"RetryInterval" statement in the "Backend" section, or globally, in
the "Resolver" section.

The "Resolver" section allows you to control how DNS lookups are
performed.  It can contain the following directives:

  CNAMEChain          (integer) Maximum allowed length of a "CNAME
		      chain".  CNAME chains are formed by DNS CNAME
		      records pointing to another CNAME.  Although
		      prohibited by the RFC, such usage occurs
		      sometimes in the wild.  By default, pound does
		      not accept CNAME chains.  If you work with a
		      nameserver that uses them, set this statement
		      to a small integer value, defining maximum
		      number of CNAMEs in the chain that pound will
		      accept.  The value of 2 or 3 should suffice in
		      most cases.

  ConfigFile          (string) Name of the resolver configuration file.
		      Default is "/etc/resolv.conf".

  ConfigText
    ...
  End                 The material within this section is read
		      verbatim and used as the content of the resolver
		      configuration file.

		      If both ConfigFile and ConfigText are used, the
		      last statement used wins.

  Debug               (boolean) Whether to enable DNS debugging info.

  RetryInterval       (integer) Interval in seconds, after which to
		      retry failed DNS queries or queries that
		      returned no RRs.  This value is used unless the
		      backend defines its own retry interval value.

Dynamic backends can be controlled using poundctl.  For example,
consider the following output from "poundctl list":

  1. Listener http://192.0.2.1:80 enabled
      0. Service active (5)
	  0. matrix "be0.example.com" 2 0 active
	  1. backend http 198.51.100.15:8081 5 alive active
	  2. backend http 203.0.113.121:8081 5 alive active
	  3. backend http 192.0.2.203:8081 5 alive active

The backend 0 ("matrix") refers to the "Backend" statement in the
configuration file that produced the other three dynamic backends.
Disabling it (poundctl disable /1/0/0) causes the dynamic ones to
be removed.  Enabling it will create them again.  In a pinch, this
can be used to force backend re-creation prior to TTL expiration.

** Compiling

To enable dynamic backend support, you will need the adns library.  On
debian-based systems, it is installed by the following command

  apt-get install libadns1-dev

If all preconditions necessary for enabling dynamic backends are met,
the output from configure will end with the following status line:

  Dynamic backends .............................. yes
  *******************************************************************

When compiled with the dynamic backend support, output of "pound -V"
will contain the following line in the "Built-in defaults" section:

  Dynamic backends:           enabled

* Backend groups

Backend groups are a new pound feature, that extends the idea of
regular and emergency backends used in previous versions.  Any number
of backend groups can be associated with a service.  Each group
is assigned an integer number (weight).  The groups are ordered by
weight (in ascending order) and are tried in that order when looking
for a backend to serve the request.  The look up starts with the first
group.  The balancing algorithm configured for the service is applied.
If no backend can be selected, next group will be tried, and so on.

In the static configuration, regular backends are hosted in backend
group of weight 0 and emergency (high availability) backends are
stored in group of weight 65535.  One consequence of this is that
any number of Emergency backend declarations are now allowed in
a service.  More backend groups can be allocated when using dynamic
backends of "srv" resolve type (see above).

* Emergency backends

Any number of emergency backends can be defined.  Usual request
balancing algorithm applies when selecting an emergency backend.

All statements valid within a "Backend" section are also valid within
an emergency backend declaration.

* Listener address configuration

Both "Address" and "Port" statements are now optional.  If "Address"
is omitted, pound will listen on all available interfaces.  If "Port"
is omitted (and not listening on a UNIX socket), default port number
for this kind of listener will be used: 80, for "ListenHTTP", and 443,
for "ListenHTTPS".

* New request matching conditional: ClientCert

The syntax is:

   ClientCert "FILENAME"

The conditional evaluates to true if the client presented the
certificate matching that from the given file (PEM format).

It cannot be used in standalone services (i.e. services
that are defined in global scope).  It also cannot be used if the
"ListenHTTPS" section that hosts the service has the "ClientCert"
statement on its own.

* Remote access to the management interface

A new backend type "Control" is introduced to make it possible to
access the management interface remotely.  The example below shows
how to configure pound to expose the management interface on
http://192.0.2.1:3434:

  ListenHTTP
      Address 192.0.2.1
      Port 3434
      Service
	  ACL "secure"
	  Control
      End
  End

* poundctl

Changes in poundctl functionality reflect those in the management
interface.  First of all, the -s option accepts URL as its argument:

  -s https://user:password@hostname:8080/path

Additionally, the following new options are implemented:

  -C FILE      Load CA certificates from FILE.  If FILE is a
	       directory, all PEM files will be loaded from it.
  -K FILE      Load client certificate and key from FILE.  During TLS
	       handshake, send them to the peer for authentication.
  -k           Insecure mode: disable peer verification.
  -S NAME      Take settings for server NAME from the poundctl
	       configuration file (see below).

** .poundctl

The file ".poundctl" in user home directory provides configuration
settings for the poundctl command.  Syntactically, it is similar to
pound.cfg.  Upon startup, poundctl first checks if "~/.poundctl"
exists and reads it if so.  If the program cannot determine the URL of
the control socket from it (possibly using the argument to the -S
option, if given), it scans the pound configuration file (if it
exists), looking for Control statement.  Finally, if neither method
determines the URL, poundctl requires the user to supply the -s
option.

The default name and location of the poundctl configuration file can
be changed using the environment variable POUNDCTL_CONF.  Setting it
to empty string disables the configuration mechanism altogether.

* configure

Removed historic "--with-owner" and "--with-group" options.


Version 4.13, 2024-08-24

* Support for pcre and pcre2 rewritten

The pcre2posix (or pcreposix) layer is no longer used.  Instead, pound
uses the native API of the corresponding library.  This provides for
additional speed-up and (in case of pcre2) avoids coredumps under high
load.

* Use of POSIX and Perl-compatible regular expressions

In contrast to previous versions, both types of regular expressions
can be used simultaneously in the configuration file.  The flavour
of the regex to use can be specified either individually with each
request matching statement (such as URL, Header, etc.), or globally.

To set it globally, use the RegexType statement.  The type of regular
expression set by it will be used in all matching statements that
appear below that statement, unless they declare regex type
explicitly.  It remains in effect until next RegexType statement or
end of file is encountered, whichever occurs first.  For example, to
use PCRE by default, add the following statement somewhere near the
beginning of your pound.cfg file:

  RegexType pcre

To change the default back to POSIX regexps, do

  RegexType posix

Regular expression type can also be specified with each matching
statement individually.  For example, the -pcre option indicates that
Perl-compatible regular expression is given as argument, e.g.:

  Host -pcre -icase "(?<!www\\.)example.org"

Similarly, the -posix option indicates that POSIX extended regular
expression is used.  Use these options to override the default for a
single statement.

* New matching option: -contain

The -contain option enables substring match. E.g. the following will
match if URL contains the word "user" (case-insensitive):

  URL -contain -icase "user"

* New configuration statement: LogTag

Sets a string to tag syslog messages with.  By default, the name used
to start the program is assumed.

* Bugfixes

** Fix infinite recursion on reporting an out of memory condition.
** Fix deadlock in session expiration handling.
** Fix RewriteLocation functionality.

Version 4.12, 2024-04-26

* Includes manual in texinfo format

* Change in the order of applying rewrites to responses

When rewriting a response, rules defined in the service section are
applied first, followed by the ones defined in the listener.

When rewriting incoming requests, the order is opposite: first the
rules in the listener, then the ones in the service.

* Requests with unrecognized Transfer-Encoding are rejected

* Requests containing both Transfer-Encoding and Content-Length are rejected

* Deprecated configuration statements

Pound issues a warning for each deprecated statement used in the
configuration file.  The warning message contains a suggestion on what
to use instead of the offending statement.  You are advised to replace
each occurrence of deprecated statements in accordance with these
suggestions, since such statements will be removed in future releases.

If it is not feasible to do so for a while, you can suppress these
messages by using the "-W no-warn-deprecated" command line option.

* ServerName directive is allowed in the Emergency section

* New statement: ErrorFile

  ErrorFile NNN "FILENAME"

This statement defines content of the response page returned with
the HTTP status NNN from the file FILENAME.  It obsoletes the
Err400 - Err503 statements used in previous versions.  These
statements are still supported for backward compatibility, although
their use is discouraged.

* New statement: MaxURI

This statement sets the maximum allowed length of the request URI.
It can be used in ListenHTTP and ListenHTTPS sections.

* Bugfixes

** Don't try to access the include directory, unless needed by configuration.

** Fix handling of session deletion/addition on request from poundctl.


Version 4.11, 2024-01-03

* Combining multi-value headers

HTTP protocol allows for certain headers to appear in the message
multiple times.  Namely, multiple headers with the same header name
are permitted if that header field is defined as a comma-separated
list.  The standard specifies that such fields can be combined in
a single "header: value" pair, by appending each subsequent field
value to the previous one, each separated by a comma.

Pound is able to perform such combining on incoming requests as well
as on responses.  To enable this feature, declare names of headers
that can be combined using the CombineHeader statement, e.g.:

    CombineHeaders
	"Accept"
	"Allow"
	"Forwarded"
    End

Pound distribution includes file "mvh.inc" which declares all
multiple-value headers in a form suitable for inclusion to the main
pound configuration file.  This file is installed in the package
data directory, which is normally /usr/local/share/pound or
/usr/share/pound, depending on the installation prefix used.

* SNI in HTTPS backends

New directive ServerName is provided for use in Backend section after
HTTPS statement.  This directive sets the host name to be used in server
name identification (SNI).  Its argument is a quoted string specifying
the host name.  This directive also rewrites the Host: header
accordingly.  Example usage:

    Backend
	HTTPS
	Address 192.0.2.1
	Port 443
	ServerName "www.example.org"
    End

* "Cert" statement in "ListenHTTPS" section

Argument to the "Cert" statement in "ListenHTTPS" section can be
the name of a directory containing certificate files.  All files from
that directory will be loaded.

Version 4.10, 2023-10-13

* Global "Backend" definitions

A "Backend" statement is allowed to appear in global scope.  In this
case it must be followed by a symbolic name, as in:

  Backend "name"
    ...
  End

The "name" must uniquely identify this backend among other backends
defined in global scope.

Global backend definitions can be used in services using the
"UseBackend" statement:

  UseBackend "name"

A single globally defined backend can be used in multiple services.
Its actual global definition may appear before as well as after the
service or services it is used in.

A named form of Backend statement is also allowed for use in
Service sections.  In this case it acts as "UseBackend" statement,
except that statements between "Backend" and "End" modify the
parameters of the backend for use in this particular service.  Only
two statements are allowed in such named form: "Priority" and
"Disabled".  The following example attaches the globally defined
backend "assets" to the service and modifies its priority:

  Backend "assets"
    Priority 8
  End

* Response header modification

The "Rewrite" statement accepts optional argument specifying whether
it applies to the incoming request, or to the response.  The following
statement applies to requests and is exactly equivalent to "Rewrite"
without argument:

  Rewrite request
    ...
  End

In contrast, the following statement:

  Rewrite response
    ...
  End

applies to the response (received from the regular backend or generated
by error backend).  In this form, the set of statements that can
appear inside the section (denoted by ellipsis above) is limited to
the following: "Not", "Match", "Header", "StringMatch",
"SetHeader", and "DeleteHeader".  For example:

  Rewrite response
    Match
      Header "Content-Type: text/(.*)"
    End
    SetHeader "X-Text-Type: $1"
  End

The same applies to "Else" branches.

* Basic authentication

New request matching statement "BasicAuth" is implemented.  Its
syntax is:

  BasicAuth "FILE"

It evaluates to true, if the incoming request contains Authorization
header with scheme "Basic", such that user name and password obtained
from it match a line in the given disk file.  FILE must be a
plain-text file created with htpasswd(1) or similar utility, i.e. each
non-empty line of it must contain username and password hash separated
by a colon.  Password hash can be one of:

  . Password in plain text.
  . Hash created by the system crypt(3) function.
  . Password hashed using SHA1 algorithm and encoded in base64.
    This hash must be prefixed by {SHA}
  . Apache-style "APR1" hash.

Combined with the response rewriting described above, this can be
used to implement basic HTTP authentication in Pound as shown in
the following example:

  Service "auth"
      Not BasicAuth "/etc/pound/htpass"
      Rewrite response
	  SetHeader "WWW-Authenticate: Basic realm=\"Restricted access\""
      End
      Error 401
  End

Unless the file name starts with a slash, it is taken relative to the
"IncludeDir" directory.  The file is cached in the memory on the first
authorization attempt, so that further authorizations do not result in
disk i/o operations.  It will be rescanned if Pound notices that the
file's modification time has changed.

* Bugfixes

** The Host statement assumes exact match by default.
** Fix detection of duplicate Transfer-Encoding headers.

Version 4.9, 2023-08-22

* HTTP request logging

In addition to six built-in log formats, you can define your own
"named" formats and use them in the LogLevel directive.  Log format is
defined using the following statement:

  LogFormat "name" "format_string"

The "name" argument specifies a string uniquely identifying this
format.  "Format_string" is the format specification.  It is
modelled after Apache's mod_log_config LogFormat string.  For example,
the built-in format 3 is defined as:

  "%a - %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\""

The LogLevel directive has been extended to take symbolic format name
as argument.  For example:

  LogLevel "my_format"

The traditional built-in formats are assigned the following symbolic names:

  0 - "null"
  1 - "regular"
  2 - "extended"
  3 - "vhost_combined"
  4 - "combined"
  5 - "detailed"

So, instead of

  LogLevel 3

one may write

  LogLevel "vhost_combined"

* New statements: ForwardedHeader and TrustedIP

These statements control how the %a log format conversion specifier
determines the originator IP address:

  ForwardedHeader "name"
    Defines the name of HTTP header that carries the list of
    proxies the request has passed through.  It is used to
    report the originator IP address when logging.

    The default is "X-Forwarded-For".  This statement can be
    used in global, listener, and service scope.

  TrustedIP
    Defines a list of trusted proxy IP addresses, which is used to
    determine the originator IP.  This is a special form of the ACL
    statement and, as the latter, it can appear in two forms: directive
    and section.

    In directive form, it takes a single argument referring to a
    named access control list, which must have been defined previously
    using the ACL statement.

    In section form, it is followed by a list of one or more CIDRs
    each appearing on a separate line.  The End directive on a
    separate line terminates the statement.

    This statement can be used in global, listener, and service scope.

* New service statement: LogSuppress

Suppresses HTTP logs for requests that resulted in response status
codes from a particular group or groups.  The statement takes one or more
arguments specifying status code groups to suppress log messages for:

  info or 1      1xx status codes
  success or 2   2xx status codes
  redirect or 3  3xx status codes
  clterr or 4    4xx status codes
  srverr or 5    5xx status codes
  all            all status codes

Suggested usage is for special services that are likely to accept
large numbers of similar requests, such as Openmetrics services.  For
example:

   Service "metrics"
       URL "/metrics"
       Metrics
       LogSuppress success
   End

* New request matching directive: StringMatch

The syntax is:

  StringMatch "SUBJECT" [OPTIONS] "PATTERN"

OPTIONS are usual matcher options.  The directive matches if SUBJECT,
after backreference expansion and accessor interpretation, matches
PATTERN.

This directive allows you to build complex service selection criteria.
For example:

  Service
      Host "^foobar\.(.+)$"
      StringMatch "$1" -file "domain.list"
      ...
  End

The service above will be used for requests whose Host header value is
"foobar." followed by a domain name from the file "domain.list".

* New request accessors: host and port

The %[host] accessor returns the hostname part of the Host header
value.  The %[port] accessor returns port number with leading
column character.  If no explicit port number is given in the Host
value, %[port] returns empty string.

* Bugfixes

** Fix the QueryParam statement.

** Improve testsuite and documentation.

Version 4.8, 2023-05-28

* Support for libpcre2-posix

* Fix coredump on -c -v

* poundctl: ignore empty lines in pound.cfg


Version 4.7, 2023-04-17

* Default include directory

Configuration directives that take filenames as their argument, search
for files in the include directory (unless the filename is absolute).
Initial value of the include directory is set to the system configuration
directory, as configured at compile time.   It can be changed:

1. from the command line, using the -Winclude-dir=DIR or -Wno-include-dir
   options.  The latter form resets it to the current working
   directory.

2. in the global scope of the configuration file, using the IncludeDir
   configuration statement.

* The "Include" directive

The "Include" directive can appear not only at the topmost level, but
also in any sections (ListenHTTP, Service, ACL, etc.). In short -
anyplace where a statement is allowed.

* Reading patterns from file

All request matching directives (Header, Host, URL, etc.) take an
additional option "-file".  When this option is specified, the
argument to the directive is treated as the name of a file to read
patterns from.  If the filename is relative, it is looked up in the
include directory (see above).  Patterns are read from the file line
by line, empty lines and comments are ignored.  For example:

   Service
      Host -file "pound/webhosts"
      ...
   End

* Early pthread_cancel probe

Pound calls pthread_cancel(3p) during its shutdown sequence.  In GNU
libc, a call to this function involves loading the libgcc_s.so.1
shared library.  In previous versions, this would fail if pound
was running in chrooted environment (RootJail), unless that library
had previously been copied to the chroot directory.  The following
diagnostics would be printed

   libgcc_s.so.1 must be installed for pthread_cancel to work

and the program would abort.  That means that normal pound shutdown
sequence was not performed properly.  Starting with this version, pound
will create and cancel a dummy thread right before doing chroot.  This
ensures that libgcc_s.so.1 is loaded early, so that pthread_cancel is
run successfully even when chrooted later.

This early probe is enabled if pound is linked with GNU libc.  The
--enable-pthread-cancel-probe configure option is available to
forcefully enable or disable it, if the need be.

* PID file and control socket are properly removed when in RootJail mode.

This doesn't cover the case where the privileges of the user the
program runs at (as set by the "User" and "Group" configuration
statements) forbid to remove the file.

* Control socket ownership and mode

The "Control" configuration directive has two forms: inline and
section.  The inline form is the same as in previous versions.
The block "Control" statement allows you to manage the file mode
and ownership of the socket file.  Its syntax is:

  Control
    Socket "FILE"
    Mode OCTAL
    ChangeOwner BOOL
  End

The Socket statement sets the name of the UNIX socket file.  This is
the only mandatory statement in the Control block.  The Mode statement
sets mode of the socket file (default is 600).  Finally, if ChangeOwner
is true, the ownership of the socket file will be changed
to the user defined by the User and/or Group statements in global
scope.

Version 4.6, 2023-03-07

* Load-balancing strategies

A load balancing strategy defines algorithm used to distribute
incoming requests between multiple regular backends.  This version
of pound implements two such strategies:

** Weighted Random Balancing

This is the default strategy and the one implemented by prior versions
of pound.  Each backend is assigned a numeric priority between 0 and 9
(inclusive).  The backend to use for each request is determined at
random taking into account backend priorities, so that backends with
numerically greater priorities have proportionally greater chances of
being selected than the ones with lesser priorities.

** Interleaved Weighted Round Robin Balancing

Requests are assigned to each backend in turn.  Backend priorities, or
weights, are used to control the share of requests handled by each
backend.  The greater the weight, the more requests will be sent to
this backend.

* New statement: Balancer

The Balancer statement can appear in global and in Service scope.  It
defines the load balancer to use.  Possible arguments are: random, to
use weighted random balancing (default), and iwrr to use interleaved
weighted round robin balancing.

* Backreferences

Up to eight most recent matches are saved.  They can be referenced
as $N(M), where N is number of the parenthesized subexpression, and
M is number of the match.  Matches are numbered in reverse chronological
order with the most recent one being at index 0.  The (0) can be
omitted ($1 is the same as $1(0)).

For example, given the following statements:

  Host -re "www\\.(.+)"
  Header -re -icase "^Content-Type: *(.*)"
  Path "^/static(/.*)?"

"$1" refers to the subgroup of Path, "$1(1)" - to that of Header, and
"$1(2)" - to that of Host.

Curly braces may be used to delimit reference from the text that
follows it.  This is useful if the reference is immediately followed
by a decimal digit or opening parenthesis, as in: "${1}(text)".

* Request matching directives

In addition to "URL" and "Header", the following matching directives
are provided

  Path [options] "value"
    Match path.

  Query [options] "value"
    Match query.

  QueryParam "name" [options] "value"
    Match query parameter.

* Request modification directives

Request modification directives apply changes to the incoming request
before passing it on to the service or backend.  They can be used both
in ListenHTTP (ListenHTTPS) and Service sections.  The following
directives are provided:

  DeleteHeader "header: pattern"
      Remove matching headers from the incoming requests.

  SetHeader "header: to add"
      Add the defined header to the request passed.  If the header
      already exists, change its value.

  SetURL "value"
      Sets the URL part of the request.

  SetPath "value"
      Sets the path part.

  SetQuery "value"
      Sets the query part.

  SetQueryParam "name" "value"
      Sets the query parameter "name" to "value".

  Rewrite ... [ Else ... ] End
      Conditionally apply request modification depending on whether request
      matches certain conditions, e.g.:

		Rewrite
			Path "\\.(jpg|gif)$"
			SetPath "/images$0"
		Else
			Match AND
				Host "example.org"
				Path "\\.[^.]+$"
			End
			SetPath "/static$0"
		Else
			Path "\\.[^.]+$"
			SetPath "/assets$0"
		End

* Request accessors

These are special constructs that, when used in string values, are
replaced with the corresponding parts of the incoming request.  The
supported accessors are:

 %[url]
   The URL of the request.

 %[path]
   The path part of the request.

 %[query]
   The query part of the request.

 %[param NAME]
   The value of the query parameter NAME.

 %[header NAME]
   The value of the request header NAME.

Request accessor can be used in all strings where the use of
backreferences is allowed: i.e. arguments to Redirect, ACME,
Error directives, and to all request modification directives described
above.

* Listener labels

Listeners can be assigned symbolic labels.  The syntax is:

  ListenHTTP "name"
or
  ListenHTTPS "name"

The "name" must be unique among all listeners defined in the
configuration.

This symbolic name can be used to identify listener in poundctl
requests (see below).

* Service labels

Service labels must be unique among all services within the
listener (or in the configuration file, for global ones).

* Use of listener and service labels in poundctl

Listeners and services can be identified both by their numbers and
labels.  For example:

  poundctl list /main/static/1

* Use of multiple redirects in single service

Use of multiple redirect backends in single service, as well as mixing
them with regular backends is deprecated and causes a warning message.


Version 4.5, 2023-02-12

* RPC over HTTP support withdrawn

It has been officially discontinued by Microsoft on 2017-10-31.  It's
no use trying to support it five years after.

* Support for 303 and 308 redirection codes

* Improved default error responses

* New special backend: Error

The Error statement defines a special backend that returns the
HTTP error page.  It takes one to two arguments:

  Error STATUS [FILE]

The STATUS argument supplies HTTP status code.  Optional FILE argument is
the name of a disk file with the error page content (HTML).  If not
supplied, the text is determined as usual: first the Err<STATUS> statement
for the enclosing listener is consulted.  If it is not present, the
default error page is used.

* New special backend: Metrics

This backend type implements openmetrics telemetry endpoint.  The
minimal configuration is:

  Service
      URL "/metrics"
      Metrics
  End

Enabling backend statistics (see below) is strongly suggested when
using the Metrics backend.

* Backend statistics

Backend usage statistics is enabled by the BackendStats configuration
directive:

  BackendStats true

When enabled, the "stats" object will be added to the JSON output for
each backend.  This object holds the following fields:

  request_count          Number of requests processed by this backend.
  request_time_avg       Average request processing time.
  request_time_stddev    Standard deviation of the above.

The Metrics backend, if declared, will then include the following
metric families in its output

  pound_backend_requests
  pound_backend_request_time_avg_nanoseconds
  pound_backend_request_stddev_nanoseconds

These three families are labeled by the corresponding backend index,
e.g. (output split in two lines for readability):

  pound_backend_request_time_avg_nanoseconds
      {listener="1",service="1",backend="1"} 17232220

* Core statistics

The default output returned by pound control thread now includes
additional core statistics: pound version, PID, worker subsystem
configuration and state.  The default poundctl template has been
changed to reflect it.

* New options: -F and -e

The -F option forces the foreground mode: the program won't detach
itself from the controlling terminal and will remain in foreground even
if configuration settings require otherwise.

The -e option directs error diagnostics to stderr (stdout for
LOG_DEBUG and LOG_INFO facilities).  It implies foreground mode.

* Changes in verbose mode (-v)

Error messages emitted to stderr (stdout) are duplicated in the
syslog, if the configuration settings require so.

* Arithmetic operations in poundctl templates

The four new functions are provided to implement basic arithmetic
operations in templates: add, sub, mul, and div.

* Fixed the LogFacility configuration statement


Version 4.4, 2023-01-19

* New directive: HeaderOption

The HeaderOption directive controls what kind of "canned" headers
pound adds to the HTTP request before passing it on to the backend.
By default, it adds "forwarded" headers (X-Forwarded-For,
X-Forwarded-Proto, and X-Forwarded-Port) and, if serving a HTTPS
session, X-SSL-* headers.

The arguments to the HeaderOption directive enable or disable these
canned headers.  The default corresponds to

  HeaderOption forwarded ssl

To disable any kind of headers, precede its name with a "no-":

  HeaderOption no-forwarded

The special keywords "none" and "all", can be used to disable or
enable all canned headers.

The HeaderOption directive can appear in the global scope or within
a ListenerHTTP (or ListenerHTTPS) section.

* Header modification and service matching

Header modification directives are applied after service matching
directives (such as Header or HeadRequire).  This is a disruptive
change: in previous pound version header removal was done prior to
service selection.

* Header modification order

Header modification directives are applied in the following order:
HeaderOptions, HeaderRemove, HeaderAdd.  In other words, built-in headers
are added first.  Then, header removal directives are applied.
Finally, headers requested by the user are added.  Added headers
overwrite headers with the same name that may already be present in the
request.  Thus, you can use HeaderRemove and HeaderAdd to trim down
headers added by HeaderOptions.

* Back-references in Redirect and ACME statements

Arguments to Redirect and ACME statements can contain references to
parenthesized subexpressions in the most recently matched URL, Header,
or Host statements.  Syntactically, $N refers to URL subexpression and
%N refers to subexpression of Header (or Host).  $0 and %0 are
expanded to the entire URL or header (host).  For example, to redirect
all requests to https:

	Service
		Host -re ".+"
		URL ".*"
		Redirect "https://%0$0"
	End

Version 4.3, 2023-01-13

* Template support in poundctl

The output of poundctl is controlled by a template.  Templates
are read from a template file, which is looked up in template
search path (normally ~/.poundctl.tmpl:/usr/share/pound/poundctl.tmpl).
The poundctl.tmpl file shipped with the distribution defines templates
for the traditional (plain-text) and XML output.

The option "-t FILE" instructs poundctl to use FILE instead of the
default template file.  The option "-T NAME" supplies the name of
the template to be used.

* Fix parsing of Subject in X509 certificates


Version 4.2, 2022-12-31

* Rewrite periodic tasks

The timer thread is rewritten completely in order to do periodic
operations (such as backend probing and session expiration)
precisely when needed, instead of waking up in fixed intervals and
checking what should be done.  Among others, this helps reduce the CPU
load.

Whenever a backend is marked as dead, a periodic job is scheduled
for "alive_to" seconds from the current time, which will probe the
backend and either mark it as alive (if it responds) or reschedule
itself for a later time (if it does not).  Thus, no unnecessary
iterations over listeners/servers/backends occur.

Sessions are kept on per-service basis in a combined structure
consisting of a hash table (to quickly look-up a session) and
a doubly-linked list (to provide for session expiration).  Sessions
within the latter are sorted by their expiration time.  A periodic
job is scheduled to the expiration time of the first session in the
list, i.e. the least recently used one.  After removing the expired
session, the job reschedules itself to the expiration time of the
next session (which becomes first in the list), if any.

* The "haport" feature has been removed.

* Control interface rewritten

The new control interface uses REST API.

* Poundctl rewritten

Version 4.1, 2022-12-10

* Worker Model

Each incoming request is processed by a specific worker, i.e. a
thread in the running program.  The number of running workers is
controlled by three configuration parameters.  WorkerMinCount
defines the minimum number of workers that should always be running
(5, by default). Another parameter, WorkerMaxCount sets the
upper limit on the number of running workers (defaults to 128).

At each given moment, a worker can be in one of two states: idle
or active (processing a request).  If an incoming request
arrives when all running workers are active, and total number of
workers is less than maximum, a new thread is started and the new
request is handed to it.  If the number of active workers has already
reached maximum, the new request is added to the request queue, where
it will wait for a worker to become available to process it.

The third parameter, WorkerIdleTimeout, specifies maximum time
a thread is allowed to spend in the idle state.  If a worker
remains idle longer than that and total number of workers is greater
than the allotted minimum, the idle worker is terminated.  The default
value for WorkerIdleTimeout is 30 seconds.

* URL expansion in Redirect statement

URL argument to the Redirect statement can contain references to
parethesized subexpressions in the most recently matched URL statement
of the enclosing Service.  References are of the form $N, where N
is the number of the parenthesized subgroup.  To insert literal $
sign, use $$.

* New statement: PIDFile

Defines the name of the PID file.  The -p command line option
overrides this setting.

* New statement: ACME

The ACME statement creates a service specially crafted for answering
ACME HTTP-01 challenge requests.  It takes a single argument,
specifying a directory where ACME challenges are stored.  It is
supposed that another program is started periodically, which checks
for certificates approaching their expiration, issues renewal requests
and stores the obtained ACME challenges in that directory.

The statement can appear in ListenHTTP block.

Example usage:

  ListenHTTP
    ACME "/var/www/acme"
    ...
  End

* New statement: Host

The "Host" statement is provided to facilitate handling of virtual
services.  The statement:

  Host "example.com"

is equivalent to:

  HeadRequire "Host:[[:space:]]*example\\.com"

* ACLs

Access control lists (ACLs) allow you to make some services available
for users coming from certain IP ranges.  There are two kinds of ACLs:
named and unnamed.  Named ACLs are defined in the global scope, using
the following syntax:

  ACL "name"
     "CIDR"
     ...
  End

where ... denotes more CIDR lines.  A CIDR is an IPv4 or IPv6 address,
optionally followed by a slash and network mask length.  Named ACLs
can be referred to in Service sections using the following syntax:

  Service
     ACL "name"
     ...
  End

This service will be used only if the request comes from IP address
that matches the given ACL.

Unnamed ACLs are defined within the service itself, as shown in the
following example

  Service
     ACL
	"127.0.0.1"
	"192.0.2.0/26"
	"203.0.113.0/24"
     End
     ...
  End

Semantically they are entirely equivalent to named ACLs.

* Boolean operations over request matching directives

By default, request matching directives are joined with an implicit
boolean "AND".  This can be changed using the new "Match" directive,
e.g.:

  Match OR
      HeadRequire "Host:[[:space:]]*example\\.org"
      HeadRequire "Host:[[:space:]]*example\\.net"
  End

Match directives can be nested to any depth.

Any request matching directive (including "Match") can be prefixed
with "not", to invert its result (boolean negation).

* Alternative spelling for header matching/manipulation directives

For consistency, the following configuration directives have been
provided as alternatives for existing header manipulation directives:

  Old name        New name          Comment
  --------        --------          -------
  HeadRequire     Header            Service section
  HeadDeny        Not Header        Service section.  See "Boolean operations".
  HeadRemove      HeaderRemove      ListenHTTP and ListenHTTPS sections
  AddHeader       HeaderAdd         ListenHTTP and ListenHTTPS sections

The use of new names is preferred.

Version 4.0, 2022-12-02

* Support for OpenSSL 3.0

* Added testsuite.

* Fixes in configuration parsing.

=========================================================================
Copyright information:

Copyright (C) 2018-2026 Sergey Poznyakoff

   Permission is granted to anyone to make or distribute verbatim copies
   of this document as received, in any medium, provided that the
   copyright notice and this permission notice are preserved,
   thus giving the recipient permission to redistribute in turn.

   Permission is granted to distribute modified versions
   of this document, or of portions of it,
   under the above conditions, provided also that they
   carry prominent notices stating who last changed them.

Local variables:
mode: outline
paragraph-separate: "[  ]*$"
eval: (add-hook 'write-file-functions 'time-stamp)
time-stamp-start: "changes. "
time-stamp-format: "%:y-%02m-%02d"
time-stamp-end: "\n"
end: