diff --git a/BM/rdt/README.md b/BM/rdt/README.md
new file mode 100644
index 00000000..84a7f3e5
--- /dev/null
+++ b/BM/rdt/README.md
@@ -0,0 +1,22 @@
+# Linux ACPI MRRM/ERDT test
+
+This feature validates the running Linux kernel's ACPI support for the Intel
+Resource Director Technology MRRM and ERDT tables. It does not use the
+userspace ACPICA tools or build an external kernel module.
+
+The testcase reads MRRM and ERDT through `/sys/firmware/acpi/tables`. That
+sysfs path retrieves each table through the kernel ACPICA table manager. It
+validates each ACPI header, declared length, checksum, and subtable boundaries.
+It also requires `/sys/firmware/acpi/memory_ranges/range*`, which proves that
+the Linux MRRM driver parsed the table and exported its entries, and rejects
+MRRM/ERDT initialization errors reported in the kernel log.
+
+Run it from the `BM` directory:
+
+```bash
+./runtests -f rdt/tests-acpica-mrrm-erdt
+```
+
+Run this testcase on a kernel and platform that provide MRRM and ERDT. Missing
+firmware tables are reported as `BLOCK`; malformed tables or missing kernel
+parse results are reported as `FAIL`.
\ No newline at end of file
diff --git a/BM/rdt/rdt_acpi_table_test.sh b/BM/rdt/rdt_acpi_table_test.sh
new file mode 100755
index 00000000..eab28e2e
--- /dev/null
+++ b/BM/rdt/rdt_acpi_table_test.sh
@@ -0,0 +1,171 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0-only
+# @Desc Validate Linux ACPI support for the Intel MRRM and ERDT tables.
+
+cd "$(dirname "$0")" 2>/dev/null || exit 1
+# shellcheck source=/dev/null
+source ../.env
+
+SYSFS_ROOT="${SYSFS_ROOT:-/sys}"
+ACPI_TABLE_DIR="$SYSFS_ROOT/firmware/acpi/tables"
+MEMORY_RANGE_DIR="$SYSFS_ROOT/firmware/acpi/memory_ranges"
+TEST_CASE=""
+
+usage() {
+  cat <<'EOF'
+Usage: rdt_acpi_table_test.sh -t check_mrrm_erdt
+
+Cases:
+  check_mrrm_erdt  Validate kernel retrieval and parsing of MRRM and ERDT
+EOF
+}
+
+read_u8() {
+  od -An -v -tu1 -j "$2" -N 1 "$1" | tr -d '[:space:]'
+}
+
+read_le16() {
+  local byte0 byte1
+  read -r byte0 byte1 < <(od -An -v -tu1 -j "$2" -N 2 "$1")
+  printf '%u\n' "$((byte0 | (byte1 << 8)))"
+}
+
+read_le32() {
+  local byte0 byte1 byte2 byte3
+  read -r byte0 byte1 byte2 byte3 < <(od -An -v -tu1 -j "$2" -N 4 "$1")
+  printf '%u\n' "$((byte0 | (byte1 << 8) | (byte2 << 16) | (byte3 << 24)))"
+}
+
+validate_acpi_table() {
+  local signature="$1"
+  local table="$ACPI_TABLE_DIR/$signature"
+  local actual_signature declared_length actual_length revision checksum
+
+  [[ -r "$table" ]] || block_test "Linux did not expose the ACPI $signature table"
+
+  actual_signature="$(od -An -v -tc -N 4 "$table" | tr -d '[:space:]')"
+  [[ "$actual_signature" == "$signature" ]] ||
+    die "$table has signature '$actual_signature', expected '$signature'"
+
+  declared_length="$(read_le32 "$table" 4)"
+  actual_length="$(stat -c %s "$table")" || die "Cannot stat $table"
+  ((declared_length >= 36)) || die "$signature table is shorter than the ACPI header"
+  [[ "$actual_length" == "$declared_length" ]] ||
+    die "$signature length mismatch: header=$declared_length sysfs=$actual_length"
+
+  if ! od -An -v -tu1 "$table" |
+    awk '{ for (i = 1; i <= NF; i++) sum += $i } END { exit (sum % 256 != 0) }'; then
+    die "$signature table checksum is invalid"
+  fi
+
+  revision="$(read_u8 "$table" 8)"
+  checksum="$(read_u8 "$table" 9)"
+  [[ "$revision" == 1 ]] || die "Unsupported $signature table revision $revision"
+  test_print_trc "$signature retrieved through Linux ACPI: length=$actual_length revision=$revision checksum=$checksum"
+}
+
+validate_subtables() {
+  local signature="$1"
+  local offset="$2"
+  local max_type="$3"
+  local table="$ACPI_TABLE_DIR/$signature"
+  local table_length type length count=0
+
+  table_length="$(read_le32 "$table" 4)"
+  ((table_length >= offset)) || die "$signature table is shorter than its fixed header"
+
+  while ((offset < table_length)); do
+    ((table_length - offset >= 4)) ||
+      die "$signature has a truncated subtable header at offset $offset"
+    type="$(read_le16 "$table" "$offset")"
+    length="$(read_le16 "$table" "$((offset + 2))")"
+    ((type <= max_type)) || die "$signature has unknown subtable type $type"
+    ((length >= 4)) || die "$signature subtable type $type has invalid length $length"
+    ((offset + length <= table_length)) ||
+      die "$signature subtable type $type extends past the table boundary"
+    test_print_trc "$signature subtable: offset=$offset type=$type length=$length"
+    offset=$((offset + length))
+    count=$((count + 1))
+  done
+
+  ((count > 0)) || die "$signature contains no subtables"
+}
+
+validate_mrrm_sysfs() {
+  local range attr value count=0
+  local max_regions
+
+  [[ -d "$MEMORY_RANGE_DIR" ]] ||
+    die "Linux MRRM parser did not create $MEMORY_RANGE_DIR"
+  max_regions="$(read_u8 "$ACPI_TABLE_DIR/MRRM" 36)"
+  ((max_regions > 0)) || die "MRRM reports zero supported memory regions"
+
+  for range in "$MEMORY_RANGE_DIR"/range[0-9]*; do
+    [[ -d "$range" ]] || continue
+    for attr in base length node local_region_id remote_region_id; do
+      [[ -r "$range/$attr" ]] || die "Linux MRRM parser omitted $range/$attr"
+    done
+
+    value="$(<"$range/length")"
+    if [[ ! "$value" =~ ^0x[0-9a-fA-F]+$ ]] || ((value == 0)); then
+      die "Invalid MRRM memory range length '$value' in $range"
+    fi
+    for attr in node local_region_id remote_region_id; do
+      value="$(<"$range/$attr")"
+      [[ "$value" =~ ^-?[0-9]+$ ]] || die "Invalid MRRM $attr '$value' in $range"
+    done
+
+    test_print_trc "MRRM $(basename "$range"): base=$(<"$range/base") length=$(<"$range/length") node=$(<"$range/node") local=$(<"$range/local_region_id") remote=$(<"$range/remote_region_id")"
+    count=$((count + 1))
+  done
+
+  ((count > 0)) || die "Linux MRRM parser exposed no memory ranges"
+  test_print_trc "Linux MRRM parser exposed $count ranges and max_regions=$max_regions"
+}
+
+check_kernel_messages() {
+  local messages failures
+
+  if ! messages="$(dmesg 2>/dev/null)"; then
+    test_print_wrg "Cannot read kernel log; MRRM/ERDT error scan skipped"
+    return
+  fi
+
+  failures="$(grep -Ei 'MRRM|ERDT' <<<"$messages" |
+    grep -Ei 'FW_BUG|error|fail|invalid|unsupported|truncated|malformed|mismatch' || true)"
+  [[ -z "$failures" ]] || die "MRRM/ERDT kernel initialization errors detected: $failures"
+}
+
+check_mrrm_erdt() {
+  local acpica_version max_closid
+
+  validate_acpi_table MRRM
+  validate_subtables MRRM 64 0
+  validate_mrrm_sysfs
+
+  validate_acpi_table ERDT
+  validate_subtables ERDT 64 10
+  max_closid="$(read_le32 "$ACPI_TABLE_DIR/ERDT" 36)"
+  test_print_trc "ERDT maximum supported CLOSID: $max_closid"
+
+  check_kernel_messages
+  if [[ -r "$SYSFS_ROOT/module/acpi/parameters/acpica_version" ]]; then
+    acpica_version="$(<"$SYSFS_ROOT/module/acpi/parameters/acpica_version")"
+    test_print_trc "Linux ACPICA version: $acpica_version"
+  fi
+  test_print_trc "Linux ACPI MRRM/ERDT support: PASS"
+}
+
+while getopts ":t:h" option; do
+  case "$option" in
+    t) TEST_CASE="$OPTARG" ;;
+    h) usage; exit 0 ;;
+    :) test_print_err "Option -$OPTARG requires an argument"; usage; exit 1 ;;
+    \?) test_print_err "Invalid option: -$OPTARG"; usage; exit 1 ;;
+  esac
+done
+
+case "$TEST_CASE" in
+  check_mrrm_erdt) check_mrrm_erdt ;;
+  *) test_print_err "Unsupported testcase: $TEST_CASE"; usage; exit 1 ;;
+esac
\ No newline at end of file
diff --git a/BM/rdt/tests-acpica-mrrm-erdt b/BM/rdt/tests-acpica-mrrm-erdt
new file mode 100644
index 00000000..4e0f9b21
--- /dev/null
+++ b/BM/rdt/tests-acpica-mrrm-erdt
@@ -0,0 +1,5 @@
+# Validate Linux ACPI support for Intel RDT tables.
+# @other_dep: test -r /sys/firmware/acpi/tables/MRRM @ ACPI MRRM is required
+# @other_dep: test -r /sys/firmware/acpi/tables/ERDT @ ACPI ERDT is required
+
+rdt_acpi_table_test.sh -t check_mrrm_erdt
\ No newline at end of file