diff --git a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml new file mode 100644 index 00000000000000..5cc34d4934b54f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/spacemit,p1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT P1 Power Management Integrated Circuit + +maintainers: + - Troy Mitchell + +description: + P1 is an I2C-controlled PMIC produced by SpacemiT. It implements six + constant-on-time buck converters and twelve low-dropout regulators. + It also contains a load switch, watchdog timer, real-time clock, eight + 12-bit ADC channels, and six GPIOs. Additional details are available + in the "Power Stone/P1" section at the following link. + https://developer.spacemit.com/documentation + +properties: + compatible: + const: spacemit,p1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vin-supply: + description: Input supply phandle. + + regulators: + type: object + + patternProperties: + "^(buck[1-6]|aldo[1-4]|dldo[1-7])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@41 { + compatible = "spacemit,p1"; + reg = <0x41>; + interrupts = <64>; + + regulators { + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + aldo1 { + regulator-name = "aldo1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + dldo1 { + regulator-name = "dldo1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + }; + }; + }; diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts index fe22c747c5012f..a9a2596a94e89c 100644 --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts @@ -28,6 +28,25 @@ default-state = "on"; }; }; + + reg_dc_in: dc-in-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_in_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vcc_4v: vcc-4v { + compatible = "regulator-fixed"; + regulator-name = "vcc_4v"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <®_dc_in>; + }; }; &emmc { @@ -40,6 +59,122 @@ status = "okay"; }; +&i2c8 { + pinctrl-0 = <&i2c8_cfg>; + pinctrl-names = "default"; + status = "okay"; + + pmic@41 { + compatible = "spacemit,p1"; + reg = <0x41>; + interrupts = <64>; + vin-supply = <®_vcc_4v>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + aldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + aldo2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + dldo2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_2_cfg>; diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi index 38105573742281..96d7a46d4bf773 100644 --- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi +++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi @@ -11,6 +11,13 @@ #define K1_GPIO(x) (x / 32) (x % 32) &pinctrl { + i2c8_cfg: i2c8-cfg { + i2c8-0-pins { + pinmux = , /* PWR_SCL */ + ; /* PWR_SDA */ + }; + }; + uart0_2_cfg: uart0-2-cfg { uart0-2-pins { pinmux = , diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi index abde8bb07c95c5..580f77b5e838ae 100644 --- a/arch/riscv/boot/dts/spacemit/k1.dtsi +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi @@ -459,6 +459,19 @@ status = "disabled"; }; + i2c8: i2c@d401d800 { + compatible = "spacemit,k1-i2c"; + reg = <0x0 0xd401d800 0x0 0x38>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&syscon_apbc CLK_TWSI8>, + <&syscon_apbc CLK_TWSI8_BUS>; + clock-names = "func", "bus"; + clock-frequency = <400000>; + interrupts = <19>; + status = "disabled"; + }; + pinctrl: pinctrl@d401e000 { compatible = "spacemit,k1-pinctrl"; reg = <0x0 0xd401e000 0x0 0x400>; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 425c5fba6cb1e7..4d6a5a3a272209 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1238,6 +1238,17 @@ config MFD_QCOM_RPM Say M here if you want to include support for the Qualcomm RPM as a module. This will build a module called "qcom_rpm". +config MFD_SPACEMIT_P1 + tristate "SpacemiT P1 PMIC" + depends on I2C + select MFD_SIMPLE_MFD_I2C + help + This option supports the I2C-based SpacemiT P1 PMIC, which + contains regulators, a power switch, GPIOs, an RTC, and more. + This option is selected when any of the supported sub-devices + is configured. The basic functionality is implemented by the + simple MFD I2C driver. + config MFD_SPMI_PMIC tristate "Qualcomm SPMI PMICs" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c index 22159913bea034..47ffaac035caea 100644 --- a/drivers/mfd/simple-mfd-i2c.c +++ b/drivers/mfd/simple-mfd-i2c.c @@ -93,12 +93,30 @@ static const struct simple_mfd_data maxim_mon_max77705 = { .mfd_cell_size = ARRAY_SIZE(max77705_sensor_cells), }; + +static const struct regmap_config spacemit_p1_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static const struct mfd_cell spacemit_p1_cells[] = { + { .name = "spacemit-p1-regulator", }, + { .name = "spacemit-p1-rtc", }, +}; + +static const struct simple_mfd_data spacemit_p1 = { + .regmap_config = &spacemit_p1_regmap_config, + .mfd_cell = spacemit_p1_cells, + .mfd_cell_size = ARRAY_SIZE(spacemit_p1_cells), +}; + static const struct of_device_id simple_mfd_i2c_of_match[] = { { .compatible = "kontron,sl28cpld" }, { .compatible = "silergy,sy7636a", .data = &silergy_sy7636a}, { .compatible = "maxim,max5970", .data = &maxim_max5970}, { .compatible = "maxim,max5978", .data = &maxim_max5970}, { .compatible = "maxim,max77705-battery", .data = &maxim_mon_max77705}, + { .compatible = "spacemit,p1", .data = &spacemit_p1, }, {} }; MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index eaa6df1c9f8066..3af99bc3a9ecee 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1395,6 +1395,19 @@ config REGULATOR_SLG51000 The SLG51000 is seven compact and customizable low dropout regulators. +config REGULATOR_SPACEMIT_P1 + tristate "SpacemiT P1 regulators" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on I2C + select MFD_SPACEMIT_P1 + default ARCH_SPACEMIT + help + Enable support for regulators implemented by the SpacemiT P1 + power controller. The P1 implements 6 high-efficiency buck + converters and 12 programmable LDO regulators. To compile this + driver as a module, choose M here. The module will be called + "spacemit-pmic". + config REGULATOR_STM32_BOOSTER tristate "STMicroelectronics STM32 BOOSTER" depends on ARCH_STM32 || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index be98b29d6675d8..278f5b8d1c7d7c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -162,6 +162,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o +obj-$(CONFIG_REGULATOR_SPACEMIT_P1) += spacemit-p1.o obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o diff --git a/drivers/regulator/spacemit-p1.c b/drivers/regulator/spacemit-p1.c new file mode 100644 index 00000000000000..d437e6738ea1e3 --- /dev/null +++ b/drivers/regulator/spacemit-p1.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for regulators found in the SpacemiT P1 PMIC + * + * Copyright (C) 2025 by RISCstar Solutions Corporation. All rights reserved. + * Derived from code from SpacemiT. + * Copyright (c) 2023, SPACEMIT Co., Ltd + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MOD_NAME "spacemit-p1-regulator" + +enum p1_regulator_id { + P1_BUCK1, + P1_BUCK2, + P1_BUCK3, + P1_BUCK4, + P1_BUCK5, + P1_BUCK6, + + P1_ALDO1, + P1_ALDO2, + P1_ALDO3, + P1_ALDO4, + + P1_DLDO1, + P1_DLDO2, + P1_DLDO3, + P1_DLDO4, + P1_DLDO5, + P1_DLDO6, + P1_DLDO7, +}; + +static const struct regulator_ops p1_regulator_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +/* Selector value 255 can be used to disable the buck converter on sleep */ +static const struct linear_range p1_buck_ranges[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 170, 5000), + REGULATOR_LINEAR_RANGE(1375000, 171, 254, 25000), +}; + +/* Selector value 0 can be used for suspend */ +static const struct linear_range p1_ldo_ranges[] = { + REGULATOR_LINEAR_RANGE(500000, 11, 127, 25000), +}; + +/* These define the voltage selector field for buck and LDO regulators */ +#define BUCK_MASK GENMASK(7, 0) +#define LDO_MASK GENMASK(6, 0) + +#define P1_ID(_TYPE, _n) P1_ ## _TYPE ## _n +#define P1_ENABLE_REG(_off, _n) ((_off) + 3 * ((_n) - 1)) + +#define P1_REG_DESC(_TYPE, _type, _n, _s, _off, _mask, _nv, _ranges) \ + { \ + .name = #_type #_n, \ + .supply_name = _s, \ + .of_match = of_match_ptr(#_type #_n), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = P1_ID(_TYPE, _n), \ + .n_voltages = _nv, \ + .ops = &p1_regulator_ops, \ + .owner = THIS_MODULE, \ + .linear_ranges = _ranges, \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .vsel_reg = P1_ENABLE_REG(_off, _n) + 1, \ + .vsel_mask = _mask, \ + .enable_reg = P1_ENABLE_REG(_off, _n), \ + .enable_mask = BIT(0), \ + } + +#define P1_BUCK_DESC(_n) \ + P1_REG_DESC(BUCK, buck, _n, "vcc", 0x47, BUCK_MASK, 254, p1_buck_ranges) + +#define P1_ALDO_DESC(_n) \ + P1_REG_DESC(ALDO, aldo, _n, "vcc", 0x5b, LDO_MASK, 117, p1_ldo_ranges) + +#define P1_DLDO_DESC(_n) \ + P1_REG_DESC(DLDO, dldo, _n, "buck5", 0x67, LDO_MASK, 117, p1_ldo_ranges) + +static const struct regulator_desc p1_regulator_desc[] = { + P1_BUCK_DESC(1), + P1_BUCK_DESC(2), + P1_BUCK_DESC(3), + P1_BUCK_DESC(4), + P1_BUCK_DESC(5), + P1_BUCK_DESC(6), + + P1_ALDO_DESC(1), + P1_ALDO_DESC(2), + P1_ALDO_DESC(3), + P1_ALDO_DESC(4), + + P1_DLDO_DESC(1), + P1_DLDO_DESC(2), + P1_DLDO_DESC(3), + P1_DLDO_DESC(4), + P1_DLDO_DESC(5), + P1_DLDO_DESC(6), + P1_DLDO_DESC(7), +}; + +static int p1_regulator_probe(struct platform_device *pdev) +{ + struct regulator_config config = { }; + struct device *dev = &pdev->dev; + u32 i; + + /* + * The parent device (PMIC) owns the regmap. Since we don't + * provide one in the config structure, that one will be used. + */ + config.dev = dev->parent; + + for (i = 0; i < ARRAY_SIZE(p1_regulator_desc); i++) { + const struct regulator_desc *desc = &p1_regulator_desc[i]; + struct regulator_dev *rdev; + + rdev = devm_regulator_register(dev, desc, &config); + if (IS_ERR(rdev)) + return dev_err_probe(dev, PTR_ERR(rdev), + "error registering regulator %s\n", + desc->name); + } + + return 0; +} + +static struct platform_driver p1_regulator_driver = { + .probe = p1_regulator_probe, + .driver = { + .name = MOD_NAME, + }, +}; + +module_platform_driver(p1_regulator_driver); + +MODULE_DESCRIPTION("SpacemiT P1 regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" MOD_NAME); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 64f6e9756aff4a..31d355b103d434 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -406,6 +406,16 @@ config RTC_DRV_MAX77686 This driver can also be built as a module. If so, the module will be called rtc-max77686. +config RTC_DRV_SPACEMIT_P1 + tristate "SpacemiT P1 RTC" + depends on ARCH_SPACEMIT || COMPILE_TEST + select MFD_SPACEMIT_P1 + default ARCH_SPACEMIT + help + Enable support for the RTC function in the SpacemiT P1 PMIC. + This driver can also be built as a module, which will be called + "spacemit-p1-rtc". + config RTC_DRV_NCT3018Y tristate "Nuvoton NCT3018Y" depends on OF diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 789bddfea99d8f..f41fdb4fabae90 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -171,6 +171,7 @@ obj-$(CONFIG_RTC_DRV_SD2405AL) += rtc-sd2405al.o obj-$(CONFIG_RTC_DRV_SD3078) += rtc-sd3078.o obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o obj-$(CONFIG_RTC_DRV_SNVS) += rtc-snvs.o +obj-$(CONFIG_RTC_DRV_SPACEMIT_P1) += rtc-spacemit-p1.o obj-$(CONFIG_RTC_DRV_SPEAR) += rtc-spear.o obj-$(CONFIG_RTC_DRV_STARFIRE) += rtc-starfire.o obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o diff --git a/drivers/rtc/rtc-spacemit-p1.c b/drivers/rtc/rtc-spacemit-p1.c new file mode 100644 index 00000000000000..43ab62494bb4b3 --- /dev/null +++ b/drivers/rtc/rtc-spacemit-p1.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the RTC found in the SpacemiT P1 PMIC + * + * Copyright (C) 2025 by RISCstar Solutions Corporation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include + +#define MOD_NAME "spacemit-p1-rtc" + +/* + * Six consecutive 1-byte registers hold the seconds, minutes, hours, + * day-of-month, month, and year (respectively). + * + * The range of values in these registers is: + * seconds 0-59 + * minutes 0-59 + * hours 0-59 + * day 0-30 (struct tm is 1-31) + * month 0-11 + * year years since 2000 (struct tm is since 1900) + * + * Note that the day and month must be converted after reading and + * before writing. + */ +#define RTC_TIME 0x0d /* Offset of the seconds register */ + +#define RTC_CTRL 0x1d +#define RTC_EN BIT(2) + +/* Number of attempts to read a consistent time stamp before giving up */ +#define RTC_READ_TRIES 20 /* At least 1 */ + +struct p1_rtc { + struct regmap *regmap; + struct rtc_device *rtc; +}; + +/* + * The P1 hardware documentation states that the register values are + * latched to ensure a consistent time snapshot within the registers, + * but these are in fact unstable due to a bug in the hardware design. + * So we loop until we get two identical readings. + */ +static int p1_rtc_read_time(struct device *dev, struct rtc_time *t) +{ + struct p1_rtc *p1 = dev_get_drvdata(dev); + struct regmap *regmap = p1->regmap; + u32 count = RTC_READ_TRIES; + u8 seconds; + u8 time[6]; + int ret; + + if (!regmap_test_bits(regmap, RTC_CTRL, RTC_EN)) + return -EINVAL; /* RTC is disabled */ + + ret = regmap_bulk_read(regmap, RTC_TIME, time, sizeof(time)); + if (ret) + return ret; + + do { + seconds = time[0]; + ret = regmap_bulk_read(regmap, RTC_TIME, time, sizeof(time)); + if (ret) + return ret; + } while (time[0] != seconds && --count); + + if (!count) + return -EIO; /* Unable to get a consistent result */ + + t->tm_sec = time[0] & GENMASK(5, 0); + t->tm_min = time[1] & GENMASK(5, 0); + t->tm_hour = time[2] & GENMASK(4, 0); + t->tm_mday = (time[3] & GENMASK(4, 0)) + 1; + t->tm_mon = time[4] & GENMASK(3, 0); + t->tm_year = (time[5] & GENMASK(5, 0)) + 100; + + return 0; +} + +/* + * The P1 hardware documentation states that values in the registers are + * latched so when written they represent a consistent time snapshot. + * Nevertheless, this is not guaranteed by the implementation, so we must + * disable the RTC while updating it. + */ +static int p1_rtc_set_time(struct device *dev, struct rtc_time *t) +{ + struct p1_rtc *p1 = dev_get_drvdata(dev); + struct regmap *regmap = p1->regmap; + u8 time[6]; + int ret; + + time[0] = t->tm_sec; + time[1] = t->tm_min; + time[2] = t->tm_hour; + time[3] = t->tm_mday - 1; + time[4] = t->tm_mon; + time[5] = t->tm_year - 100; + + /* Disable the RTC to update; re-enable again when done */ + ret = regmap_clear_bits(regmap, RTC_CTRL, RTC_EN); + if (ret) + return ret; + + /* If something goes wrong, leave the RTC disabled */ + ret = regmap_bulk_write(regmap, RTC_TIME, time, sizeof(time)); + if (ret) + return ret; + + return regmap_set_bits(regmap, RTC_CTRL, RTC_EN); +} + +static const struct rtc_class_ops p1_rtc_class_ops = { + .read_time = p1_rtc_read_time, + .set_time = p1_rtc_set_time, +}; + +static int p1_rtc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rtc_device *rtc; + struct p1_rtc *p1; + + p1 = devm_kzalloc(dev, sizeof(*p1), GFP_KERNEL); + if (!p1) + return -ENOMEM; + dev_set_drvdata(dev, p1); + + p1->regmap = dev_get_regmap(dev->parent, NULL); + if (!p1->regmap) + return dev_err_probe(dev, -ENODEV, "failed to get regmap\n"); + + rtc = devm_rtc_allocate_device(dev); + if (IS_ERR(rtc)) + return dev_err_probe(dev, PTR_ERR(rtc), + "error allocating device\n"); + p1->rtc = rtc; + + rtc->ops = &p1_rtc_class_ops; + rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; + rtc->range_max = RTC_TIMESTAMP_END_2063; + + clear_bit(RTC_FEATURE_ALARM, rtc->features); + clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->features); + + return devm_rtc_register_device(rtc); +} + +static struct platform_driver p1_rtc_driver = { + .probe = p1_rtc_probe, + .driver = { + .name = MOD_NAME, + }, +}; + +module_platform_driver(p1_rtc_driver); + +MODULE_DESCRIPTION("SpacemiT P1 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" MOD_NAME);