From 55f630652db90cbc2529f7cb77e72559ac71ec23 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 12 Aug 2025 21:45:02 -0500 Subject: [PATCH 1/7] dt-bindings: mfd: add support the SpacemiT P1 PMIC Enable the SpacemiT P1, which is an I2C-controlled PMIC. Initially only the RTC and regulators will be supported. Signed-off-by: Alex Elder Reviewed-by: Rob Herring (Arm) Signed-off-by: Linux RISC-V bot --- .../devicetree/bindings/mfd/spacemit,p1.yaml | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/spacemit,p1.yaml diff --git a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml new file mode 100644 index 00000000000000..5cc34d4934b54f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/spacemit,p1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT P1 Power Management Integrated Circuit + +maintainers: + - Troy Mitchell + +description: + P1 is an I2C-controlled PMIC produced by SpacemiT. It implements six + constant-on-time buck converters and twelve low-dropout regulators. + It also contains a load switch, watchdog timer, real-time clock, eight + 12-bit ADC channels, and six GPIOs. Additional details are available + in the "Power Stone/P1" section at the following link. + https://developer.spacemit.com/documentation + +properties: + compatible: + const: spacemit,p1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vin-supply: + description: Input supply phandle. + + regulators: + type: object + + patternProperties: + "^(buck[1-6]|aldo[1-4]|dldo[1-7])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@41 { + compatible = "spacemit,p1"; + reg = <0x41>; + interrupts = <64>; + + regulators { + buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + aldo1 { + regulator-name = "aldo1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + dldo1 { + regulator-name = "dldo1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + }; + }; + }; From e46e97df8f76c669b02cf71f6b3f26424bbf2f9d Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 12 Aug 2025 21:45:03 -0500 Subject: [PATCH 2/7] mfd: simple-mfd-i2c: add SpacemiT P1 support Enable support for the RTC and regulators found in the SpacemiT P1 PMIC. Support is implemented by the simple I2C MFD driver. The P1 PMIC is normally implemented with the SpacemiT K1 SoC. This PMIC provides 6 buck converters and 12 LDO regulators. It also implements a switch, watchdog timer, real-time clock, and more. Initially its RTC and regulators are supported. Signed-off-by: Alex Elder Signed-off-by: Linux RISC-V bot --- drivers/mfd/Kconfig | 11 +++++++++++ drivers/mfd/simple-mfd-i2c.c | 18 ++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 425c5fba6cb1e7..4d6a5a3a272209 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1238,6 +1238,17 @@ config MFD_QCOM_RPM Say M here if you want to include support for the Qualcomm RPM as a module. This will build a module called "qcom_rpm". +config MFD_SPACEMIT_P1 + tristate "SpacemiT P1 PMIC" + depends on I2C + select MFD_SIMPLE_MFD_I2C + help + This option supports the I2C-based SpacemiT P1 PMIC, which + contains regulators, a power switch, GPIOs, an RTC, and more. + This option is selected when any of the supported sub-devices + is configured. The basic functionality is implemented by the + simple MFD I2C driver. + config MFD_SPMI_PMIC tristate "Qualcomm SPMI PMICs" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c index 22159913bea034..47ffaac035caea 100644 --- a/drivers/mfd/simple-mfd-i2c.c +++ b/drivers/mfd/simple-mfd-i2c.c @@ -93,12 +93,30 @@ static const struct simple_mfd_data maxim_mon_max77705 = { .mfd_cell_size = ARRAY_SIZE(max77705_sensor_cells), }; + +static const struct regmap_config spacemit_p1_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static const struct mfd_cell spacemit_p1_cells[] = { + { .name = "spacemit-p1-regulator", }, + { .name = "spacemit-p1-rtc", }, +}; + +static const struct simple_mfd_data spacemit_p1 = { + .regmap_config = &spacemit_p1_regmap_config, + .mfd_cell = spacemit_p1_cells, + .mfd_cell_size = ARRAY_SIZE(spacemit_p1_cells), +}; + static const struct of_device_id simple_mfd_i2c_of_match[] = { { .compatible = "kontron,sl28cpld" }, { .compatible = "silergy,sy7636a", .data = &silergy_sy7636a}, { .compatible = "maxim,max5970", .data = &maxim_max5970}, { .compatible = "maxim,max5978", .data = &maxim_max5970}, { .compatible = "maxim,max77705-battery", .data = &maxim_mon_max77705}, + { .compatible = "spacemit,p1", .data = &spacemit_p1, }, {} }; MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match); From 94f94171a33a5408a6ff5a93fd481069499a4398 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 12 Aug 2025 21:45:04 -0500 Subject: [PATCH 3/7] regulator: spacemit: support SpacemiT P1 regulators Add support for the regulators found in the SpacemiT P1 PMIC. This PMIC provides 6 buck converters and 12 LDO regulators. The PMIC is implemented as a multi-function device. These regulators are probed based on this driver being named in a MFD cell in the simple MFD I2C driver. Signed-off-by: Alex Elder Reviewed-by: Mark Brown Signed-off-by: Linux RISC-V bot --- drivers/regulator/Kconfig | 13 +++ drivers/regulator/Makefile | 1 + drivers/regulator/spacemit-p1.c | 157 ++++++++++++++++++++++++++++++++ 3 files changed, 171 insertions(+) create mode 100644 drivers/regulator/spacemit-p1.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index eaa6df1c9f8066..3af99bc3a9ecee 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1395,6 +1395,19 @@ config REGULATOR_SLG51000 The SLG51000 is seven compact and customizable low dropout regulators. +config REGULATOR_SPACEMIT_P1 + tristate "SpacemiT P1 regulators" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on I2C + select MFD_SPACEMIT_P1 + default ARCH_SPACEMIT + help + Enable support for regulators implemented by the SpacemiT P1 + power controller. The P1 implements 6 high-efficiency buck + converters and 12 programmable LDO regulators. To compile this + driver as a module, choose M here. The module will be called + "spacemit-pmic". + config REGULATOR_STM32_BOOSTER tristate "STMicroelectronics STM32 BOOSTER" depends on ARCH_STM32 || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index be98b29d6675d8..278f5b8d1c7d7c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -162,6 +162,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o +obj-$(CONFIG_REGULATOR_SPACEMIT_P1) += spacemit-p1.o obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o diff --git a/drivers/regulator/spacemit-p1.c b/drivers/regulator/spacemit-p1.c new file mode 100644 index 00000000000000..d437e6738ea1e3 --- /dev/null +++ b/drivers/regulator/spacemit-p1.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for regulators found in the SpacemiT P1 PMIC + * + * Copyright (C) 2025 by RISCstar Solutions Corporation. All rights reserved. + * Derived from code from SpacemiT. + * Copyright (c) 2023, SPACEMIT Co., Ltd + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MOD_NAME "spacemit-p1-regulator" + +enum p1_regulator_id { + P1_BUCK1, + P1_BUCK2, + P1_BUCK3, + P1_BUCK4, + P1_BUCK5, + P1_BUCK6, + + P1_ALDO1, + P1_ALDO2, + P1_ALDO3, + P1_ALDO4, + + P1_DLDO1, + P1_DLDO2, + P1_DLDO3, + P1_DLDO4, + P1_DLDO5, + P1_DLDO6, + P1_DLDO7, +}; + +static const struct regulator_ops p1_regulator_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +/* Selector value 255 can be used to disable the buck converter on sleep */ +static const struct linear_range p1_buck_ranges[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 170, 5000), + REGULATOR_LINEAR_RANGE(1375000, 171, 254, 25000), +}; + +/* Selector value 0 can be used for suspend */ +static const struct linear_range p1_ldo_ranges[] = { + REGULATOR_LINEAR_RANGE(500000, 11, 127, 25000), +}; + +/* These define the voltage selector field for buck and LDO regulators */ +#define BUCK_MASK GENMASK(7, 0) +#define LDO_MASK GENMASK(6, 0) + +#define P1_ID(_TYPE, _n) P1_ ## _TYPE ## _n +#define P1_ENABLE_REG(_off, _n) ((_off) + 3 * ((_n) - 1)) + +#define P1_REG_DESC(_TYPE, _type, _n, _s, _off, _mask, _nv, _ranges) \ + { \ + .name = #_type #_n, \ + .supply_name = _s, \ + .of_match = of_match_ptr(#_type #_n), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = P1_ID(_TYPE, _n), \ + .n_voltages = _nv, \ + .ops = &p1_regulator_ops, \ + .owner = THIS_MODULE, \ + .linear_ranges = _ranges, \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .vsel_reg = P1_ENABLE_REG(_off, _n) + 1, \ + .vsel_mask = _mask, \ + .enable_reg = P1_ENABLE_REG(_off, _n), \ + .enable_mask = BIT(0), \ + } + +#define P1_BUCK_DESC(_n) \ + P1_REG_DESC(BUCK, buck, _n, "vcc", 0x47, BUCK_MASK, 254, p1_buck_ranges) + +#define P1_ALDO_DESC(_n) \ + P1_REG_DESC(ALDO, aldo, _n, "vcc", 0x5b, LDO_MASK, 117, p1_ldo_ranges) + +#define P1_DLDO_DESC(_n) \ + P1_REG_DESC(DLDO, dldo, _n, "buck5", 0x67, LDO_MASK, 117, p1_ldo_ranges) + +static const struct regulator_desc p1_regulator_desc[] = { + P1_BUCK_DESC(1), + P1_BUCK_DESC(2), + P1_BUCK_DESC(3), + P1_BUCK_DESC(4), + P1_BUCK_DESC(5), + P1_BUCK_DESC(6), + + P1_ALDO_DESC(1), + P1_ALDO_DESC(2), + P1_ALDO_DESC(3), + P1_ALDO_DESC(4), + + P1_DLDO_DESC(1), + P1_DLDO_DESC(2), + P1_DLDO_DESC(3), + P1_DLDO_DESC(4), + P1_DLDO_DESC(5), + P1_DLDO_DESC(6), + P1_DLDO_DESC(7), +}; + +static int p1_regulator_probe(struct platform_device *pdev) +{ + struct regulator_config config = { }; + struct device *dev = &pdev->dev; + u32 i; + + /* + * The parent device (PMIC) owns the regmap. Since we don't + * provide one in the config structure, that one will be used. + */ + config.dev = dev->parent; + + for (i = 0; i < ARRAY_SIZE(p1_regulator_desc); i++) { + const struct regulator_desc *desc = &p1_regulator_desc[i]; + struct regulator_dev *rdev; + + rdev = devm_regulator_register(dev, desc, &config); + if (IS_ERR(rdev)) + return dev_err_probe(dev, PTR_ERR(rdev), + "error registering regulator %s\n", + desc->name); + } + + return 0; +} + +static struct platform_driver p1_regulator_driver = { + .probe = p1_regulator_probe, + .driver = { + .name = MOD_NAME, + }, +}; + +module_platform_driver(p1_regulator_driver); + +MODULE_DESCRIPTION("SpacemiT P1 regulator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" MOD_NAME); From 40b3ec4a7d0db3115a4e06ad22ccf87edda66f82 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 12 Aug 2025 21:45:05 -0500 Subject: [PATCH 4/7] rtc: spacemit: support the SpacemiT P1 RTC Add support for the RTC found in the SpacemiT P1 PMIC. Initially only setting and reading the time are supported. The PMIC is implemented as a multi-function device. This RTC is probed based on this driver being named in a MFD cell in the simple MFD I2C driver. Signed-off-by: Alex Elder Acked-by: Alexandre Belloni Signed-off-by: Linux RISC-V bot --- drivers/rtc/Kconfig | 10 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-spacemit-p1.c | 167 ++++++++++++++++++++++++++++++++++ 3 files changed, 178 insertions(+) create mode 100644 drivers/rtc/rtc-spacemit-p1.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 64f6e9756aff4a..31d355b103d434 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -406,6 +406,16 @@ config RTC_DRV_MAX77686 This driver can also be built as a module. If so, the module will be called rtc-max77686. +config RTC_DRV_SPACEMIT_P1 + tristate "SpacemiT P1 RTC" + depends on ARCH_SPACEMIT || COMPILE_TEST + select MFD_SPACEMIT_P1 + default ARCH_SPACEMIT + help + Enable support for the RTC function in the SpacemiT P1 PMIC. + This driver can also be built as a module, which will be called + "spacemit-p1-rtc". + config RTC_DRV_NCT3018Y tristate "Nuvoton NCT3018Y" depends on OF diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 789bddfea99d8f..f41fdb4fabae90 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -171,6 +171,7 @@ obj-$(CONFIG_RTC_DRV_SD2405AL) += rtc-sd2405al.o obj-$(CONFIG_RTC_DRV_SD3078) += rtc-sd3078.o obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o obj-$(CONFIG_RTC_DRV_SNVS) += rtc-snvs.o +obj-$(CONFIG_RTC_DRV_SPACEMIT_P1) += rtc-spacemit-p1.o obj-$(CONFIG_RTC_DRV_SPEAR) += rtc-spear.o obj-$(CONFIG_RTC_DRV_STARFIRE) += rtc-starfire.o obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o diff --git a/drivers/rtc/rtc-spacemit-p1.c b/drivers/rtc/rtc-spacemit-p1.c new file mode 100644 index 00000000000000..43ab62494bb4b3 --- /dev/null +++ b/drivers/rtc/rtc-spacemit-p1.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the RTC found in the SpacemiT P1 PMIC + * + * Copyright (C) 2025 by RISCstar Solutions Corporation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include + +#define MOD_NAME "spacemit-p1-rtc" + +/* + * Six consecutive 1-byte registers hold the seconds, minutes, hours, + * day-of-month, month, and year (respectively). + * + * The range of values in these registers is: + * seconds 0-59 + * minutes 0-59 + * hours 0-59 + * day 0-30 (struct tm is 1-31) + * month 0-11 + * year years since 2000 (struct tm is since 1900) + * + * Note that the day and month must be converted after reading and + * before writing. + */ +#define RTC_TIME 0x0d /* Offset of the seconds register */ + +#define RTC_CTRL 0x1d +#define RTC_EN BIT(2) + +/* Number of attempts to read a consistent time stamp before giving up */ +#define RTC_READ_TRIES 20 /* At least 1 */ + +struct p1_rtc { + struct regmap *regmap; + struct rtc_device *rtc; +}; + +/* + * The P1 hardware documentation states that the register values are + * latched to ensure a consistent time snapshot within the registers, + * but these are in fact unstable due to a bug in the hardware design. + * So we loop until we get two identical readings. + */ +static int p1_rtc_read_time(struct device *dev, struct rtc_time *t) +{ + struct p1_rtc *p1 = dev_get_drvdata(dev); + struct regmap *regmap = p1->regmap; + u32 count = RTC_READ_TRIES; + u8 seconds; + u8 time[6]; + int ret; + + if (!regmap_test_bits(regmap, RTC_CTRL, RTC_EN)) + return -EINVAL; /* RTC is disabled */ + + ret = regmap_bulk_read(regmap, RTC_TIME, time, sizeof(time)); + if (ret) + return ret; + + do { + seconds = time[0]; + ret = regmap_bulk_read(regmap, RTC_TIME, time, sizeof(time)); + if (ret) + return ret; + } while (time[0] != seconds && --count); + + if (!count) + return -EIO; /* Unable to get a consistent result */ + + t->tm_sec = time[0] & GENMASK(5, 0); + t->tm_min = time[1] & GENMASK(5, 0); + t->tm_hour = time[2] & GENMASK(4, 0); + t->tm_mday = (time[3] & GENMASK(4, 0)) + 1; + t->tm_mon = time[4] & GENMASK(3, 0); + t->tm_year = (time[5] & GENMASK(5, 0)) + 100; + + return 0; +} + +/* + * The P1 hardware documentation states that values in the registers are + * latched so when written they represent a consistent time snapshot. + * Nevertheless, this is not guaranteed by the implementation, so we must + * disable the RTC while updating it. + */ +static int p1_rtc_set_time(struct device *dev, struct rtc_time *t) +{ + struct p1_rtc *p1 = dev_get_drvdata(dev); + struct regmap *regmap = p1->regmap; + u8 time[6]; + int ret; + + time[0] = t->tm_sec; + time[1] = t->tm_min; + time[2] = t->tm_hour; + time[3] = t->tm_mday - 1; + time[4] = t->tm_mon; + time[5] = t->tm_year - 100; + + /* Disable the RTC to update; re-enable again when done */ + ret = regmap_clear_bits(regmap, RTC_CTRL, RTC_EN); + if (ret) + return ret; + + /* If something goes wrong, leave the RTC disabled */ + ret = regmap_bulk_write(regmap, RTC_TIME, time, sizeof(time)); + if (ret) + return ret; + + return regmap_set_bits(regmap, RTC_CTRL, RTC_EN); +} + +static const struct rtc_class_ops p1_rtc_class_ops = { + .read_time = p1_rtc_read_time, + .set_time = p1_rtc_set_time, +}; + +static int p1_rtc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rtc_device *rtc; + struct p1_rtc *p1; + + p1 = devm_kzalloc(dev, sizeof(*p1), GFP_KERNEL); + if (!p1) + return -ENOMEM; + dev_set_drvdata(dev, p1); + + p1->regmap = dev_get_regmap(dev->parent, NULL); + if (!p1->regmap) + return dev_err_probe(dev, -ENODEV, "failed to get regmap\n"); + + rtc = devm_rtc_allocate_device(dev); + if (IS_ERR(rtc)) + return dev_err_probe(dev, PTR_ERR(rtc), + "error allocating device\n"); + p1->rtc = rtc; + + rtc->ops = &p1_rtc_class_ops; + rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; + rtc->range_max = RTC_TIMESTAMP_END_2063; + + clear_bit(RTC_FEATURE_ALARM, rtc->features); + clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->features); + + return devm_rtc_register_device(rtc); +} + +static struct platform_driver p1_rtc_driver = { + .probe = p1_rtc_probe, + .driver = { + .name = MOD_NAME, + }, +}; + +module_platform_driver(p1_rtc_driver); + +MODULE_DESCRIPTION("SpacemiT P1 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" MOD_NAME); From 25f97fafff5de30c2ebaaa35fae39bd289bae9c8 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 12 Aug 2025 21:45:06 -0500 Subject: [PATCH 5/7] riscv: dts: spacemit: enable the i2c8 adapter Define properties for the I2C adapter that provides access to the SpacemiT P1 PMIC. Enable this adapter on the Banana Pi BPI-F3. Signed-off-by: Alex Elder Signed-off-by: Linux RISC-V bot --- arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 12 ++++++++++++ arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi | 7 +++++++ arch/riscv/boot/dts/spacemit/k1.dtsi | 13 +++++++++++++ 3 files changed, 32 insertions(+) diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts index fe22c747c5012f..ae9409fe398b2e 100644 --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts @@ -40,6 +40,18 @@ status = "okay"; }; +&i2c8 { + pinctrl-0 = <&i2c8_cfg>; + pinctrl-names = "default"; + status = "okay"; + + pmic@41 { + compatible = "spacemit,p1"; + reg = <0x41>; + interrupts = <64>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_2_cfg>; diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi index 38105573742281..96d7a46d4bf773 100644 --- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi +++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi @@ -11,6 +11,13 @@ #define K1_GPIO(x) (x / 32) (x % 32) &pinctrl { + i2c8_cfg: i2c8-cfg { + i2c8-0-pins { + pinmux = , /* PWR_SCL */ + ; /* PWR_SDA */ + }; + }; + uart0_2_cfg: uart0-2-cfg { uart0-2-pins { pinmux = , diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi index abde8bb07c95c5..580f77b5e838ae 100644 --- a/arch/riscv/boot/dts/spacemit/k1.dtsi +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi @@ -459,6 +459,19 @@ status = "disabled"; }; + i2c8: i2c@d401d800 { + compatible = "spacemit,k1-i2c"; + reg = <0x0 0xd401d800 0x0 0x38>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&syscon_apbc CLK_TWSI8>, + <&syscon_apbc CLK_TWSI8_BUS>; + clock-names = "func", "bus"; + clock-frequency = <400000>; + interrupts = <19>; + status = "disabled"; + }; + pinctrl: pinctrl@d401e000 { compatible = "spacemit,k1-pinctrl"; reg = <0x0 0xd401e000 0x0 0x400>; From dc63b005f24f5863dd6a2a9113019467f70a9b79 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 12 Aug 2025 21:45:07 -0500 Subject: [PATCH 6/7] riscv: dts: spacemit: define fixed regulators Define the DC power input and the 4v power as fixed supplies in the Banana Pi BPI-F3. Signed-off-by: Alex Elder Signed-off-by: Linux RISC-V bot --- .../boot/dts/spacemit/k1-bananapi-f3.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts index ae9409fe398b2e..a11a60b9f369b3 100644 --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts @@ -28,6 +28,25 @@ default-state = "on"; }; }; + + reg_dc_in: dc-in-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_in_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vcc_4v: vcc-4v { + compatible = "regulator-fixed"; + regulator-name = "vcc_4v"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-boot-on; + regulator-always-on; + vin-supply = <®_dc_in>; + }; }; &emmc { From d07796fe01b25ec59ca80d7bbc3258c233b93c61 Mon Sep 17 00:00:00 2001 From: Alex Elder Date: Tue, 12 Aug 2025 21:45:08 -0500 Subject: [PATCH 7/7] riscv: dts: spacemit: define regulator constraints Define basic constraints for the regulators in the SpacemiT P1 PMIC, as implemented in the Banana Pi BPI-F3. Signed-off-by: Alex Elder Signed-off-by: Linux RISC-V bot --- .../boot/dts/spacemit/k1-bananapi-f3.dts | 104 ++++++++++++++++++ 1 file changed, 104 insertions(+) diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts index a11a60b9f369b3..a9a2596a94e89c 100644 --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts @@ -68,6 +68,110 @@ compatible = "spacemit,p1"; reg = <0x41>; interrupts = <64>; + vin-supply = <®_vcc_4v>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + buck6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3450000>; + regulator-ramp-delay = <5000>; + regulator-always-on; + }; + + aldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + aldo2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + aldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + dldo2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo5 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + + dldo6 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + dldo7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3400000>; + }; + }; }; };