opencode-tmux-window-status

An OpenCode plugin that renames the current tmux window with a status icon reflecting the session state, so you can see at a glance which pane needs your attention.

What it does

While opencode runs inside a tmux pane, the window name is prefixed with an icon that tracks the session state:

State	Trigger	Icon (Nerd Font)
Busy / working	session.status → busy (or retry)	\uF04B ()
Idle / waiting for prompt	session.status → idle	\uE63F ()
Needs attention	permission.asked / question.asked	\u{F03E4} (󰏤)
Errored	session.error	\u{F1238} (󱈸)

A transient retry status (e.g. provider rate-limit backoff) keeps the busy icon, since the session is still working on the turn.

The icons are Nerd Font glyphs; use a Nerd Font in your terminal to render them. The glyphs embedded in this README and in the tmux config examples below also render as empty boxes ("tofu") without a Nerd Font installed.

Outside tmux the plugin is a no-op. It also honors REMOTE_TMUX / REMOTE_PANE for controlling a forwarded local tmux server from a remote host (see Remote / forwarded tmux).

Install

Add the package to your opencode config:

{
  "$schema": "https://opencode.ai/config.json",
  "plugin": ["@koriit/opencode-tmux-window-status"]
}

opencode installs npm plugins automatically at startup.

tmux configuration

The plugin works out of the box, but a couple of optional tmux settings make the status icons more useful.

Surface the icon in the terminal title

If you also set the terminal title from tmux (set-titles on), you can prepend the status icon to the title so it shows up in your terminal tab / taskbar even when the tmux window is not focused. The expression below prefixes the title with the leading status icon (if the window name starts with one) and otherwise leaves the title unchanged:

set -g set-titles on
set -g set-titles-string "#{?#{m/r:^[\ue63f\uf04b󰏤󱈸],#{window_name}},#{=1:window_name} ,}tx/#{session_name}"

The character class [\ue63f\uf04b󰏤󱈸] matches the four status glyphs used by this plugin (idle, busy, attention, error).

Faster status refresh

tmux re-derives the window name on its status interval. If you want the icon to appear/clear more promptly, lower the interval:

set -g status-interval 1

Remote / forwarded tmux

When opencode runs on a remote host (over SSH, inside a Lima/VM, a container, etc.) there is no local TMUX to control. To still drive your local tmux window from the remote opencode, the plugin reads REMOTE_TMUX / REMOTE_PANE as a fallback for TMUX / TMUX_PANE:

Variable	Used for
REMOTE_TMUX	tmux socket (set as TMUX when invoking tmux)
REMOTE_PANE	target pane (tmux ... -t "$REMOTE_PANE")

These variables are not provided by tmux, opencode, or this plugin — you must set them up yourself. The usual approach is to reverse-forward your local tmux socket over SSH and export the two variables in the remote shell.

A minimal SSH wrapper that does this:

# Forward the local tmux socket to the remote host and expose it via
# REMOTE_TMUX / REMOTE_PANE so remote tools can drive the local tmux window.
ssht() {
  local target="$1"
  local sock="${TMUX%%,*}"                       # local socket path
  local remote_sock="/tmp/remote-tmux-$$.sock"
  local remote_tmux="${remote_sock},${TMUX#*,}"  # preserve tmux metadata

  ssh -t \
    -o StreamLocalBindUnlink=yes \
    -R "${remote_sock}:${sock}" \
    "$target" \
    "export REMOTE_TMUX='${remote_tmux}' REMOTE_PANE='${TMUX_PANE}'; exec \$SHELL -l"
}

Then ssht myhost, run opencode there, and the status icons will appear on your local tmux window. If the remote host has its own tmux (TMUX is set), that takes precedence and the forwarded socket is ignored.

Restoring the window name on exit

This plugin deliberately does not restore the original window name when opencode quits. opencode hard-terminates the plugin worker on exit, so a dispose or process-exit hook cannot run reliably.

Restore the name from a shell wrapper around opencode instead. The wrapper runs after opencode fully exits, in the same pane, so it is guaranteed to fire. It also preserves a manually-set window name and the original automatic-rename setting.

zsh / bash

This wrapper uses the same TMUX → REMOTE_TMUX fallback as the plugin, so it works both locally and on a remote host with a forwarded socket (see Remote / forwarded tmux).

opencode() {
  local _oc_tmux="${TMUX:-$REMOTE_TMUX}"
  local _oc_pane="${TMUX_PANE:-$REMOTE_PANE}"
  local _oc_name _oc_auto

  if [ -n "$_oc_tmux" ] && [ -n "$_oc_pane" ]; then
    _oc_name="$(TMUX="$_oc_tmux" tmux display-message -t "$_oc_pane" -p '#{window_name}' 2>/dev/null)"
    _oc_auto="$(TMUX="$_oc_tmux" tmux show-window-options -t "$_oc_pane" automatic-rename 2>/dev/null | awk '{print $2}')"
  fi

  command opencode "$@"
  local ret=$?

  if [ -n "$_oc_tmux" ] && [ -n "$_oc_pane" ]; then
    TMUX="$_oc_tmux" tmux rename-window -t "$_oc_pane" "$_oc_name" 2>/dev/null
    if [ -n "$_oc_auto" ]; then
      TMUX="$_oc_tmux" tmux set-window-option -t "$_oc_pane" automatic-rename "$_oc_auto" 2>/dev/null
    else
      TMUX="$_oc_tmux" tmux set-window-option -t "$_oc_pane" -u automatic-rename 2>/dev/null
    fi
  fi

  return $ret
}

How it works

The plugin listens to the opencode event hook and maps session events to window renames. Renames are serialized through a single worker that always applies the latest requested icon: opencode invokes the event hook fire-and-forget, so without serialization concurrent renames could finish out of order and leave a stale icon.

Diagnostics are logged via client.app.log under the tmux-window-status service tag; view them with opencode --print-logs.

Development

This is a Bun project (requires Bun >= 1.2.0).

bun install          # install dependencies
bun run typecheck    # tsc --noEmit
bun test             # run unit + e2e tests (with coverage)

Individual suites and reports:

bun run test:unit        # fast, fully-mocked unit tests
bun run test:e2e         # end-to-end tests against a real, throwaway tmux server
bun run test:coverage    # explicit coverage report

Coverage is collected and gated via bunfig.toml (95% line/function threshold). The e2e tests spin up an isolated tmux server on a private socket and assert the real window name; they automatically skip when tmux is not on PATH, so they are a no-op on minimal environments. CI installs tmux so both suites run.

License

MIT