Add Extreme VOSS

docs/caveats.md

@@ -408,6 +408,15 @@ ansible-galaxy collection install community.network
 * EXOS does not support the same VRRP group for IPv4 and IPv6
 * Saved EXOS device configuration includes commands that cannot be configured on the EXOS VM. _netlab_ therefore cannot do a configuration reload for EXOS devices.
 
+(caveats-voss)=
+## Extreme Networks VOSS
+
+* The only way to configure VOSS devices with Ansible is the now-deprecated **community.network.voss_config** Ansible module. This collection is no longer actively maintained. To install it, you can still run:
+
+```shell
+ansible-galaxy collection install community.network
+```
+
 (caveats-fortios)=
 ## Fortinet FortiOS
 

docs/labs/clab.md

@@ -47,6 +47,7 @@ Lab topology file created by **[netlab up](../netlab/up.md)** or **[netlab creat
 | Citrix Netscaler       | netlab/netscaler:latest      |
 | Dell OS10              | vrnetlab/vr-ftosv            |
 | dnsmasq                | netlab/dnsmasq:latest        |
+| Extreme VOSS           | vrnetlab/extreme_voss:9.4.0.0 |
 | Fortinet FortiOS       | vrnetlab/vr-fortios:7.4.8    |
 | FRR                    | quay.io/frrouting/frr:10.1.2 |
 | Juniper vMX            | vrnetlab/vr-vmx:18.2R1.9     |

netsim/ansible/tasks/deploy-config/voss.yml

@@ -0,0 +1,5 @@
+## voss_config is deprecated with no obvious replacement
+- name: "voss_config: deploying {{ netsim_action }} from {{ config_template }}"
+  community.network.voss_config:
+    src: "{{ config_template }}"
+  tags: [ print_action, always ]

netsim/ansible/tasks/readiness-check/voss.yml

@@ -0,0 +1,15 @@
+---
+- name: Wait for CLI to be ready on VOSS devices
+  ansible.netcommon.cli_command:
+    command: "{{ netlab_check_command | default('show sys-info | head 5') }}"
+  register: cli_out
+  until: cli_out.stdout is defined and cli_out.stdout | length > 0
+  retries: "{{ netlab_check_retries | default(40) }}"
+  delay: "{{ netlab_check_delay | default(10) }}"
+  failed_when: false
+  changed_when: false
+
+- name: Confirm VOSS CLI is ready
+  debug:
+    msg: "Node {{ inventory_hostname }} is ready."
+  when: cli_out.stdout is defined and cli_out.stdout | length > 0

netsim/ansible/templates/initial/voss.j2

@@ -0,0 +1,36 @@
+sys name {{ inventory_hostname.replace("_","-") }}
+{# 
+no router isis enable
+y 
+#}
+
+router isis
+{# spbm 1 #}
+{# spbm 1 nick-name 1.11.11 #}
+spbm 1 b-vid 4051,4052 primary 4051
+manual-area 49.0001
+{# system-id 1234.0000.0001 #}
+exit
+
+{% if vlans is defined %}
+{% include 'voss.vlan.j2' %}
+{% endif %}
+
+{% for l in netlab_interfaces if l.type|default('') not in ['loopback'] %}
+{%   if l.type|default('') == 'svi' %}
+interface vlan {{ vlans[l.vlan.name].id }}
+{%     if l.ipv4 is defined and l.ipv4 is string and l.ipv4|ansible.utils.ipv4 %}
+ip address {{ l.ipv4|ansible.utils.ipaddr('address') }} {{ l.ipv4|ansible.utils.ipaddr('netmask') }}
+{%     endif %}
+exit
+{%   else %}
+interface {{ l.ifname }}
+{%     if l.name is defined %}
+name "{{ l.name | replace('->','to') }}"
+{%     elif l.type|default('') == 'stub' %}
+name "Stub"
+{%     endif %}
+no shutdown
+exit
+{%   endif %}
+{% endfor %}

netsim/ansible/templates/initial/voss.vlan.j2

@@ -0,0 +1,7 @@
+{% for vname,vdata in vlans.items() %}
+{%   if vname|lower != 'default' and vdata.id != 1 %}
+vlan create {{ vdata.id }} name "{{ vname }}" type port-mstprstp 0
+{#     Extend the VLAN over the SPB fabric, I-SID derived from the VLAN ID (placeholder until an SPB module exists) #}
+vlan i-sid {{ vdata.id }} {{ 10000 + vdata.id }}
+{%   endif %}
+{% endfor +%}

netsim/ansible/templates/vlan/voss.j2

@@ -0,0 +1,26 @@
+{% for ifdata in interfaces if ifdata.vlan is defined and ifdata.type|default('') not in ['svi','vlan_member'] %}
+{%   set port = ifdata.ifname.split(' ')[-1] %}
+{%   if ifdata.vlan.trunk is defined %}
+interface {{ ifdata.ifname }}
+encapsulation dot1q
+exit
+{%     for vname in ifdata.vlan.trunk.keys()|sort %}
+vlan members add {{ vlans[vname].id }} {{ port }}
+{%     endfor %}
+{%     if ifdata.vlan.native is defined %}
+interface {{ ifdata.ifname }}
+default-vlan-id {{ vlans[ifdata.vlan.native].id }}
+untag-port-default-vlan enable
+exit
+{%     endif %}
+{%     if 'default' not in ifdata.vlan.trunk.keys()|map('lower') %}
+vlan members remove 1 {{ port }}
+{%     endif %}
+{%   elif ifdata.vlan.access is defined %}
+vlan members remove 1 {{ port }}
+vlan members add {{ vlans[ifdata.vlan.access].id }} {{ port }}
+interface {{ ifdata.ifname }}
+default-vlan-id {{ vlans[ifdata.vlan.access].id }}
+exit
+{%   endif %}
+{% endfor +%}

netsim/devices/exos.yml

@@ -30,7 +30,7 @@ libvirt:
   create_template: exos.xml.j2
   image: netlab/exos
 clab:
-  build: True
+  build: https://github.com/srl-labs/vrnetlab/tree/master/extreme/exos
   image: vrnetlab/extreme_exos
   features:
     initial:

netsim/devices/voss.yml

@@ -0,0 +1,56 @@
+---
+description: Extreme VOSS
+support:
+  level: minimal
+interface_name: "GigabitEthernet 1/{ifindex}"
+loopback_interface_name: "loopback {ifindex}"
+ifindex_offset: 1
+mgmt_if: Mgmt
+features:
+  initial:
+    min_mtu: 1500
+    max_mtu: 9216
+    # ra: true
+    # normalize: true
+    # collect: true
+    # reload: false
+  # isis:
+  #   circuit_type: true
+  #   #import: [ bgp, ospf, ripv2, connected, static, vrf ]
+  #   unnumbered:
+  #     ipv4: true
+  #     ipv6: true
+  #     network: true
+  vlan:
+    model: switch
+    svi_interface_name: vlan{vlan}
+
+clab:
+  build: https://github.com/srl-labs/vrnetlab/tree/master/extreme/voss
+  image: vrnetlab/extreme_voss
+  features:
+    initial:
+      healthcheck: true
+  node:
+    kind: linux # kind not yet available in Containerlab
+    env:
+      CLAB_MGMT_PASSTHROUGH: "true"
+  interface:
+    name: "eth{ifindex}"
+  group_vars:
+    ansible_user: vrnetlab
+    ansible_ssh_pass: VR-netlab9
+    netlab_ready: [ ansible ]  # VOSS SSH ignores exec requests (rc=255), so the ssh check never passes
+    netlab_check_retries: 40
+    netlab_check_delay: 10
+group_vars:
+  ansible_password: rwa
+  ansible_network_os: voss
+  ansible_connection: ansible.netcommon.network_cli
+  ansible_become: true
+  ansible_become_method: enable
+  netlab_console_connection: ssh
+  netlab_ready: [ ansible ]
+external:
+  image: none
+graphite.icon: switch