0WM OpMode (Operator Mode)

0WM OpMode is the operator dashboard for creating and preparing projects. You use it to upload floorplans, edit their boundaries and walls, georeference them on a world map, and send metadata to the 0WM Server. After setup, day-to-day surveying is mainly done in the 0WM Client.

Quick Start

This project consists of static HTML/JS code and does not need a build step; you must however fetch its submodules:

git clone https://github.com/lab0-cc/0WM-OpMode.git
cd 0WM-OpMode
git submodule update --init --recursive

To run a local web server exposing those files, simply run:

python3 -m http.server 8001

Finally, open http://127.0.0.1:8001.

Configuration

The only configuration necessary for the OpMode is to make it point to the server in config.json. For our development environment:

{
  "api": "http://127.0.0.1:8000"
}

api must point to the 0WM Server.

Creating a project

When you create a project, upload a floorplan image (PNG, JPEG, or WebP). A clean top-down image works best.

Use this workflow:

1. Set the project name.
2. In Floorplan Editor, draw the boundaries and walls.
3. In Map Editor, define placement anchors on the floorplan and perform georeferencing on the world map,
4. In Additional Parameters, set altitude values (zmin, zmax, height), with any two consistent values.

On a typical development environment, our documentation uses 127.0.0.1:8000 for the server, 127.0.0.1:8001 for the OpMode, 127.0.0.1:8002 for the client, and 127.0.0.1:8003 for the mock AP.

Funding

This project is funded through NGI Zero Core, a fund established by NLnet with financial support from the European Commission's Next Generation Internet program. Learn more at the NLnet project page.